BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
A-Tech
An 8 GB DDR3 module running at 1866 MHz with CL13 latency and 1.5 V for desktop upgrades
This A-Tech module is an 8GB DDR3 1866MHz PC3-14900 desktop DIMM built with major brand chips. It runs at 1.5V with CL13 latency in a 240-pin unbuffered non-ECC form factor. The stick is tested at 1866MHz and serves as a compatible replacement for the Kingston HX318C10FR/8 part.
The module fits desktop boards that accept DDR3 1866MHz unbuffered non-ECC DIMMs at 1.5V and is marked compatible with AMD and Intel platforms. Systems requiring ECC, registered memory, laptop SO-DIMMs, or a different DDR generation will not support this part.
The decisive specification is the DDR3 1866MHz PC3-14900 rating combined with 1.5V voltage and CL13 timing. Your motherboard must explicitly support this speed, voltage and latency combination for the module to operate as intended.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3 1866 (PC3 14900) |
| Tested Frequency | 1866 |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
The module operates at the standard 1.5V DDR3 voltage with CL13 timings; most desktop boards will clock all installed DDR3 to the speed of the slowest stick, so it will work but may run at a lower frequency.
Open the BIOS or a system-info tool such as CPU-Z and verify the memory tab shows 1866MHz (PC3-14900) with a CAS latency of 13 at 1.50V.
The box contains only the single 8GB 240-pin UDIMM; desktop DIMM slots supply power and retention mechanically, so no extra brackets, cables or adapters are required.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?