我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

A-Tech

A-Tech 8GB DDR4 2133MHz ECC UDIMM 2Rx8 Server Memory

SKU CH-XYA5-GG031

8GB DDR4 2133MHz ECC UDIMM module with CL15 latency and 1.2V operation for server upgrades

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8GB capacity expands server workload headroom
  • DDR4 2133MHz PC4-17000 speed matches system bus
  • ECC UDIMM protects data integrity in critical tasks
  • 2Rx8 dual-rank layout optimises memory controller efficiency
  • 20V standard voltage keeps power draw predictable

8GB DDR4 2133MHz ECC UDIMM

This A-Tech module provides 8GB of DDR4 ECC unbuffered memory for server and workstation systems. It operates at 2133MHz with a CAS latency of CL15 and a standard 1.20V voltage. The 288-pin DIMM uses a 2Rx8 rank configuration with major brand chips. It serves as a compatible replacement for the Micron MTA18ASF1G72AZ-2G1 part number.

Capacity and headroom

The single 8GB module adds memory capacity to handle larger datasets and heavier multitasking in supported platforms. ECC functionality detects and corrects single-bit errors to maintain data integrity in critical workloads. Headroom is limited to the module's rated 2133MHz speed and the maximum capacity allowed by the host system's memory slots and chipset. Systems requiring registered DIMMs or higher densities cannot use this unbuffered module.

Bundled value

The module undergoes quality assurance testing to verify reliable performance before shipment. A lifetime warranty covers the memory for the duration of ownership. United States-based technical support is available before, during, and after purchase to assist with compatibility verification and installation questions. No additional software or physical accessories are included with the module.

商品特色

  • 8GB capacity expands server workload headroom
  • DDR4 2133MHz PC4-17000 speed matches system bus
  • ECC UDIMM protects data integrity in critical tasks
  • 2Rx8 dual-rank layout optimises memory controller efficiency
  • 20V standard voltage keeps power draw predictable

商品規格

BrandA-Tech
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

商品問答

Will this DDR4 2133 ECC UDIMM run reliably alongside other DDR4 modules already in my server?

Mixing memory speeds causes the system to run all modules at the speed of the slowest installed module, so this 2133 MHz stick will downclock to match older DDR4 DIMMs.

How can I confirm the module is operating at DDR4 2133 with ECC active after installation?

Enter the system BIOS or UEFI and verify the reported memory speed shows 2133 MT/s, the voltage reads 1.20 V, and ECC status is enabled.

Does the package contain only the 8 GB 288-pin UDIMM or are any cables or brackets included?

The box contains a single 8 GB DDR4 2133 ECC UDIMM module; no cables, brackets or additional hardware are supplied.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。