我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green rectangular circuit board with black chips and gold edge contacts

A-Tech

A-Tech 8GB DDR4 2400MHz CL17 1Rx8 260-Pin SODIMM Laptop RAM

SKU CH-CC3Y-2PGSR

8GB DDR4 2400MHz CL17 SODIMM laptop memory module with 260-pin form factor and 1.2V operation

  • Capacity8GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCNo
  • 8GB capacity lets you multitask smoothly with a single DDR4 module
  • 2400MHz speed and CL17 latency deliver responsive system performance
  • 2V standard voltage reduces power draw in compatible laptops
  • 260-pin SO-DIMM form factor fits DDR4 laptop memory slots directly
  • Tested replacement for HP part 854916-001 ensures reliable compatibility

8GB DDR4 2400MHz SODIMM for HP laptops

This 8GB DDR4 2400MHz CL17 SODIMM module is built as a direct replacement for HP part 854916-001. It suits laptop, notebook and all-in-one owners who need a straightforward capacity increase without changing voltage or form factor. The unbuffered, non-ECC design matches standard consumer platforms that accept 260-pin DDR4 memory. Installation is a simple slot-in upgrade for compatible systems.

Replaces HP 854916-001 when capacity

Swapping the original HP 854916-001 module for this unit makes sense when your workload exceeds the factory-fitted amount or when a failed stick needs a like-for-like substitute. The 2400MHz PC4-19200 rating and 1.20V operation keep the electrical profile identical to the OEM part, so the jump is worth it whenever the board already supports DDR4 2400 and an empty or occupied slot can take an 8GB 1Rx8 module.

Verify slot count, maximum module size

Before ordering, confirm that your laptop or all-in-one uses 260-pin DDR4 SO-DIMM sockets and that the BIOS or chipset allows 2400MHz operation at CL17 latency. Check how many slots are populated and whether the system accepts an 8GB 1Rx8 density per slot. The module has no heat spreader, so ensure the chassis clearance around the memory bay is adequate for a bare PCB.

商品特色

  • 8GB capacity lets you multitask smoothly with a single DDR4 module
  • 2400MHz speed and CL17 latency deliver responsive system performance
  • 2V standard voltage reduces power draw in compatible laptops
  • 260-pin SO-DIMM form factor fits DDR4 laptop memory slots directly
  • Tested replacement for HP part 854916-001 ensures reliable compatibility

商品規格

BrandA-Tech
SeriesCompatible Replacement for HP
Model854916-001
Capacity8GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
Features854916-001
Recommend UseCompatible Replacement for HP 854916-001

商品問答

Will the 260-pin DDR4 SODIMM fit my laptop's memory slot?

This module uses the standard 260-pin DDR4 SO-DIMM form factor used by most modern laptops. Verify your system requires DDR4 SO-DIMM memory before purchasing.

How do I install this 8GB DDR4 2400MHz module correctly?

Power off the laptop, remove the battery if possible, open the memory compartment, align the notch on the module with the slot key, insert firmly until seated, then press down until the retention clips snap shut.

Does this 1.20V CL17 memory require any future maintenance or replacement?

No routine maintenance is needed. The module is tested for reliability and backed by a lifetime warranty. Replace only if a memory diagnostic tool reports errors or capacity becomes insufficient.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。