A-Tech
A-Tech 8GB DDR4 2666MHz ECC RDIMM 2Rx8 Micron MTA18ASF1G72PDZ-2G6 Server Memory
An 8 GB DDR4 2666 MHz ECC RDIMM module with 2Rx8 organisation, CL19 latency and 1.20 V operation for server and workstation systems
- Capacity8GB
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- 8GB capacity lets servers handle larger workloads
- DDR4 2666MHz speed moves data quickly
- ECC RDIMM detects and corrects memory errors
- Registered 2Rx8 design stabilises high-density modules
- 20V operation matches standard DDR4 voltage
8GB DDR4 2666 ECC RDIMM for Servers
This 8GB DDR4 2666MHz ECC Registered DIMM targets administrators expanding memory in compatible servers and workstations. The module uses major-brand chips in a 2Rx8 organisation and runs at the standard 1.20V. It replaces the Micron MTA18ASF1G72PDZ-2G6 part number directly.
Upgrade from non-ECC or lower-capacity modules
The jump is worthwhile when workloads demand error-correcting code protection and registered signalling for platform stability. Systems limited to unbuffered memory or single-rank configurations cannot use this module. Verify the motherboard qualified-vendor list before ordering.
DDR4 288-pin registered interface constraints
The 288-pin DDR4 RDIMM form factor fits only slots wired for registered operation and DDR4 electricals. Mixing with unbuffered DIMMs or different-speed modules may prevent boot or force reduced frequency. Population rules vary by platform; consult the system manual for supported rank counts per channel.
商品特色
- 8GB capacity lets servers handle larger workloads
- DDR4 2666MHz speed moves data quickly
- ECC RDIMM detects and corrects memory errors
- Registered 2Rx8 design stabilises high-density modules
- 20V operation matches standard DDR4 voltage
商品規格
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
商品問答
Does this 288-pin DDR4 RDIMM fit a standard server DIMM slot?
Yes, the module uses the 288-pin DDR4 DIMM form factor and registered ECC design required by compatible server and workstation motherboards.
What is the correct way to seat the module so the ECC registration initialises?
Align the notch with the slot key, press firmly until both retention clips click, then power on so the register and ECC logic train at 1.2 V.
When should the 2Rx8 8 GB stick be replaced to keep ECC protection reliable?
Replace it if the system logs uncorrectable ECC errors, fails memory diagnostics, or no longer posts after verified seating and firmware updates.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。



