SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501503BTC
現貨
Axiom
Axiom 7100792-AX 32GB DDR3 1066 ECC Registered server RAM
32 GB DDR3 1066 ECC registered DIMM with 1.35 V operation for server memory upgrades
- Capacity32GB
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1066 (PC3 8500)
- Voltage1.35V
- ECCYes
- Buffered/RegisteredRegistered
- 32 GB capacity supports large server workloads
- ECC Registered design detects and corrects memory errors
- DDR3 1066 speed delivers 8500 MT/s data rate
- Low 1.35 V operation reduces power draw
- 240-pin DIMM fits standard DDR3 server slots
Server capacity and registration
This Axiom 7100792-AX module provides 32GB of DDR3 server memory in a 240-pin registered DIMM. It operates at 1066 MHz with a PC3-8500 rating and runs at 1.35V. On-board ECC and registered signal processing protect data integrity in multi-module configurations.
Compatibility and exclusion notes
This module suits servers that require registered ECC DDR3 DIMMs at the 1066 MHz speed grade. Systems that accept only unbuffered memory, non-ECC memory, or a different DDR generation cannot use this part. Buyers needing a different capacity, speed or form factor should select another module.
Deciding specification
The registered ECC design combined with the 1.35V DDR3 1066 standard determines whether this DIMM matches the motherboard's memory controller requirements. Verify that the platform specifies registered ECC DDR3 at this voltage and speed before ordering.
商品特色
- 32 GB capacity supports large server workloads
- ECC Registered design detects and corrects memory errors
- DDR3 1066 speed delivers 8500 MT/s data rate
- Low 1.35 V operation reduces power draw
- 240-pin DIMM fits standard DDR3 server slots
商品規格
| Brand | Axiom |
|---|---|
| Model | 7100792-AX |
| Capacity | 32GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1066 (PC3 8500) |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| 出貨重量 | 0.09 kg |
| 包裝尺寸 | 152 × 76 × 25 mm |
商品問答
Will this 32 GB DDR3-1066 registered ECC module work in my older server that uses 1.5 V DDR3 slots?
The module runs at 1.35 V; check your server documentation to confirm it supports low-voltage DDR3 before installing.
How can I verify the 32 GB stick is running at 1066 MHz with ECC active after installation?
Enter the server BIOS or UEFI and confirm the memory shows 32 GB at 1066 MHz with ECC enabled; then run a memory diagnostic from your OS.
Does the 7100792-AX box include more than the single 240-pin DIMM, or do I need anything else?
Only the 32 GB registered ECC DIMM is included; no cables, brackets or additional modules are supplied.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
