我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green 240-pin DDR3 DIMM with black chips and silver edge connectors

Black Diamond Memory

Black Diamond Memory BD16G1600MTR26 16GB DDR3 1600 ECC Registered server RAM

SKU CH-1S90-CSTJZ MPN BD16G1600MTR26

16 GB DDR3-1600 ECC registered DIMM with CL11 timing for server upgrades

  • Capacity16GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11-14
  • ECCYes

Capacity 16GB

  • 16 GB capacity supports large server workloads
  • DDR3 1600 speed delivers 12800 MT/s data rate
  • ECC registered design corrects errors for stability
  • CL11 11-11-11-14 timing optimises latency
  • 240-pin DDR3 form factor fits compatible server slots

16GB DDR3 1600 ECC Registered Module

This 16GB DDR3 1600 (PC3 12800) module is built for servers and workstations that require registered ECC memory. It operates at CL11 with 11-11-11-14 timings and uses a 240-pin form factor. The dual-rank 2Rx4 organisation helps maximise capacity per channel on compatible platforms. Buyers needing unbuffered or non-ECC DDR3 cannot use this module.

Thermals Noise and Power Draw

Registered ECC DDR3 modules run at standard JEDEC voltage and produce modest heat under typical server workloads. Passive cooling via chassis airflow is sufficient; no active fan is attached to the DIMM itself. Power draw scales with bus activity and remains within the DDR3 1600 specification envelope. Acoustic contribution is zero because the component has no moving parts.

Build Quality and Daily Connectors

Each stick uses a 240-pin edge connector keyed for DDR3 registered slots, preventing mis-insertion into unbuffered sockets. The PCB carries high-quality DRAM chips tested across over 200000 system configurations for compatibility assurance. Gold-plated contacts resist oxidation in long-term rack deployments. The registered buffer adds a clock cycle of latency but improves signal integrity on heavily populated memory buses.

商品特色

  • 16 GB capacity supports large server workloads
  • DDR3 1600 speed delivers 12800 MT/s data rate
  • ECC registered design corrects errors for stability
  • CL11 11-11-11-14 timing optimises latency
  • 240-pin DDR3 form factor fits compatible server slots

商品規格

BrandBlack Diamond Memory
ModelBD16G1600MTR26
Capacity16GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11-14
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
FeaturesServer Memory
出貨重量0.11 kg
包裝尺寸178 × 76 × 51 mm

其他版本

同系列還有 3 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install this 240-Pin DDR3 module and which notch alignment do people miss?

Align the single off-centre notch on the 240-Pin DDR3 edge connector with the DIMM slot key, press straight down until both retention clips click, and verify the registered module seats fully in the server board's registered-memory slots.

What maintenance or replacement will this ECC Registered DIMM need over its service life?

No routine maintenance is required; the module either passes POST and ECC scrubbing or it fails, at which point the 16GB DIMM is replaced as a unit under the manufacturer's lifetime coverage.

What limit appears first when this CL11 11-11-11-14 kit runs sustained workloads?

The DDR3 1600 PC3 12800 bandwidth ceiling and CL11 latency are the first bottlenecks; thermal throttling is rare in server airflow, so throughput caps out at the rated transfer rate before temperature becomes an issue.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。