Brute Networks
Brute Networks 32GB DDR4-2133 CL15 2Rx4 1.2V Registered RDIMM server RAM
32GB DDR4-2133 CL15 registered ECC RDIMM for HP servers using major-brand chips
- Capacity32GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 32 GB capacity supports demanding server workloads
- DDR4-2133 speed delivers 17000 MT/s data rate
- CL15 latency at 1.20 V reduces power draw
- Registered 2Rx4 ECC design protects data integrity
- HP 774175-001 compatible module uses major-brand chips
HP-compatible registered ECC DDR4
This 32GB DDR4-2133 module is built for HP server platforms that require registered ECC memory. It operates at 1.20V with a CL15 latency and a 2Rx4 organisation across 288 pins. The stick is validated as a direct replacement for HP part 774175-001.
Upgrading from smaller or slower DIMMs
The jump is worth it when your current configuration caps total capacity below what the workload demands or runs at a lower data rate than PC4-17000. Adding this module raises the ceiling without changing voltage or registered buffering behaviour.
Capacity headroom for virtualisation and databases
A single 32GB DIMM comfortably feeds moderate virtualisation hosts and in-memory databases that fit within one socket's channel limits. It runs out when the application set exceeds the per-channel rank budget or when the platform requires higher frequencies than 2133 MT/s.
商品特色
- 32 GB capacity supports demanding server workloads
- DDR4-2133 speed delivers 17000 MT/s data rate
- CL15 latency at 1.20 V reduces power draw
- Registered 2Rx4 ECC design protects data integrity
- HP 774175-001 compatible module uses major-brand chips
商品規格
| Brand | HP |
|---|---|
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
商品問答
Does the 288-pin DDR4 RDIMM fit a standard server DIMM slot?
Yes, the 288-pin DDR4 registered DIMM is keyed for standard DDR4 RDIMM slots in compatible HP servers
What is the correct way to seat the 32 GB 2Rx4 module so the ECC registered buffer initialises?
Align the notch, press straight down until both ejector clips click locked, then power on so the register and ECC handshake with the memory controller
When should the 1.2 V registered DIMM be swapped out?
Replace the module if the server logs uncorrectable ECC errors or if memory diagnostics report persistent failures on this stick
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。



