Brute Networks
Brute Networks P19041-B21 HP Compatible 16GB DDR4-2933 ECC Registered RDIMM 1Rx4 1.2V
16 GB DDR4-2933 ECC registered RDIMM adds reliable capacity to compatible HP servers
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR3 2933 (PC3 23400)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- 16 GB DDR4-2933 ECC RDIMM boosts server throughput
- 2 V operation cuts power draw per module
- 1Rx4 registered design scales capacity in dense configs
- Major-brand DRAM chips match OEM reliability standards
- 100 % HP-compatible drop-in for part P19041-B21
HP Compatible 16GB DDR4 RDIMM
This Brute Networks module is a 16GB DDR4-2933 ECC registered RDIMM built to match HP part number P19041-B21. It targets administrators upgrading HP ProLiant or Apollo servers that require registered memory with error correction. The 1Rx4 organisation and 1.2V operation follow the PC4-23400 standard for mainstream server platforms.
Thermals and power in normal use
Operating at 1.2V, the module draws minimal power while maintaining JEDEC DDR4 voltage levels. Registered buffering reduces electrical load on the memory controller, which helps keep system thermals stable during sustained workloads. Passive cooling via server airflow is sufficient; no active cooling or special thermal management is required for this component.
Deciding specification: registered ECC
The single factor that determines fit is the registered ECC design. Only systems with memory controllers that support registered DIMMs and ECC can use this module; desktop or consumer boards that require unbuffered non-ECC memory will not post with it installed.
商品特色
- 16 GB DDR4-2933 ECC RDIMM boosts server throughput
- 2 V operation cuts power draw per module
- 1Rx4 registered design scales capacity in dense configs
- Major-brand DRAM chips match OEM reliability standards
- 100 % HP-compatible drop-in for part P19041-B21
商品規格
| Brand | HP |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR3 2933 (PC3 23400) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
商品問答
How do I install this 288-pin DDR4 RDIMM, and what step is often missed?
Align the notch on the module with the slot key, press firmly until both retention clips click, then verify the system registers 16GB at 2933MHz in BIOS; the step often missed is fully seating both ends so the clips engage.
What maintenance or replacement will this ECC registered module need later?
No routine maintenance is required; the module is designed for continuous server operation and carries a lifetime warranty, so replacement only occurs if a memory error is logged by the ECC system.
What limit appears first under sustained load with this 1.2V 1Rx4 DDR4-2933 RDIMM?
The memory controller's maximum supported speed and rank-per-channel limit will cap throughput before the module's own 2933MHz rating becomes the bottleneck.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。



