BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Brute Networks
8GB DDR4-2133 registered ECC server RDIMM with CL15 latency and 1.2V operation
This 8GB DDR4-2133 registered DIMM is built for Cisco UCS servers that require PC4-17000 memory. It uses major-brand DRAM chips and matches the OEM part number UCS-MR-1X081RU-G for drop-in upgrades.
The module runs at 2133 MT/s with CL15 latency and 1.20 V on the standard DDR4 registered interface. Registered buffering adds one clock cycle of address/command delay, so the memory controller must support registered DIMMs and the target speed. ECC correction is mandatory for data integrity.
A single 1Rx4 rank presents one load per channel, allowing higher total capacity per channel than dual-rank alternatives. Servers that populate every slot with dual-rank modules may hit the controller rank limit before reaching the desired capacity. This module avoids that limit.
| Brand | Cisco |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
Yes — this module is an 8 GB DDR4-2133 1Rx4 registered RDIMM built to match the Cisco UCS-MR-1X081RU-G part number, so it fits directly into a slot that expects that exact configuration.
The memory will run at up to 2133 MT/s with a CL15 latency at 1.20 V, delivering the standard PC4-17000 bandwidth the server’s memory controller expects.
Yes — the 288-pin registered DDR4 form factor with ECC and 1Rx4 organisation means it can only be used in slots that support registered ECC DDR4 memory.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?