Computer Memory Solutions
Computer Memory Solutions 32GB (2x16GB) DDR4 19200 2400MHz Non-ECC DIMM ASRock X570 C114
32GB dual-channel DDR4 kit running at 2400MHz CL17 for select ASRock X570 boards
- Capacity32GB (2 x 16GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Timing17-17-17
- Voltage1.2V
- 32 GB dual-channel kit expands capacity for demanding workloads
- 2400 MHz DDR4 speed matches platform specification for stable operation
- CL17 17-17-17 timings deliver responsive latency at rated frequency
- 2 V unbuffered non-ECC design keeps power draw low and installation simple
- Validated for ASRock X570 Creator, Extreme4, Extreme4 WiFi ax and Phantom Gaming 4 motherboards
32 GB DDR4 kit for ASRock X570
This 32 GB kit contains two 16 GB DDR4 DIMMs rated at 2400 MHz with CL17 timings and 1.2 V operation. It is built for ASRock X570 Creator, Extreme4, Extreme4 WiFi ax and Phantom Gaming 4 motherboards. The unbuffered, non-ECC modules use a 288-pin layout and 2Rx8 organisation.
Sustained load behaviour
Running at the rated 2400 MHz speed, the modules maintain CL17 latency without a heat spreader, relying on case airflow for thermal management. All installed memory operates at the speed of the slowest module or the processor’s memory controller limit. A 64-bit operating system is required to address the full 32 GB capacity.
Installation notes
Insert the two DIMMs into matched channel slots, usually the second and fourth slots from the CPU socket, to enable dual-channel operation. The board supports four slots and a maximum of 128 GB, so this kit leaves room for expansion. Mixing with other DDR4 modules is possible but will force the entire array to run at the lowest common speed. Buyers who need ECC error correction or registered buffering cannot use this kit.
商品特色
- 32 GB dual-channel kit expands capacity for demanding workloads
- 2400 MHz DDR4 speed matches platform specification for stable operation
- CL17 17-17-17 timings deliver responsive latency at rated frequency
- 2 V unbuffered non-ECC design keeps power draw low and installation simple
- Validated for ASRock X570 Creator, Extreme4, Extreme4 WiFi ax and Phantom Gaming 4 motherboards
商品規格
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM2048642400DIMM |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Timing | 17-17-17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | ASRock Motherboard X570 Creator, X570 Extreme4, X570 Extreme4 WiFi ax, X570 Phantom Gaming 4 |
| Package Content | 2 Memory RAM Sticks |
商品問答
How much heat and power will the 1.2V DDR4 2400MHz kit draw when the system runs all day?
The modules operate at 1.2V without a heat spreader, so thermal output stays low and power draw is minimal during continuous use.
What motherboard and CPU combination must I already own for this 288-pin DDR4 kit to work?
You need an ASRock X570 Creator, Extreme4, Extreme4 WiFi ax or Phantom Gaming 4 motherboard with a CPU that supports DDR4 2400MHz memory.
If I keep my existing 16GB DDR4 sticks, how will this 2x16GB CL17 kit behave alongside them?
All installed memory will run at the speed of the slowest modules or the CPU limit, so mixing may drop the kit below its rated 2400MHz CL17 performance.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。



