我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR2 DIMM sticks with black chips, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions 4GB (2x2GB) DDR2 800MHz ECC Non-Registered DIMM B65

SKU CH-KM6Z-M91AT

A 4 GB DDR2 ECC unregistered kit of two 2 GB modules at 800 MHz, validated for Dell PowerEdge R200 servers

  • Capacity4GB (2 x 2GB)
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 800 (PC2 6400)
  • CAS LatencyCL6
  • Timing6-6-6
  • Voltage1.8V
  • ECC safeguards data integrity on Dell PowerEdge R200
  • 800 MHz DDR2 speed matches server specifications
  • 4 GB total capacity in a matched 2 x 2 GB kit
  • 8 V operation meets DDR2 voltage requirements
  • 240-pin unregistered DIMM installs directly into R200 slots

Targeted Server Upgrade

This 4GB kit contains two 2GB DDR2 modules built for the Dell PowerEdge R200. ECC protection and unregistered operation match the server’s memory architecture exactly. The 240-pin form factor installs directly into the four available slots without adapters or configuration changes. System administrators maintaining legacy infrastructure receive guaranteed compatibility from a specialist memory brand.

Thermals and Power

Operating at the standard 1.8V DDR2 voltage, the modules draw minimal power inside the chassis. No heat spreader is fitted, so airflow from the server’s existing fans passes over the chips unimpeded. CL6 timings at 800MHz keep electrical load steady during typical workloads. The design adds no measurable acoustic contribution to the rack environment.

Build and Connectivity

Major-brand chips are assembled on a standard 240-pin PCB with 2Rx8 organisation. Gold edge contacts resist oxidation during long service intervals. The two-stick package lets you populate a pair of slots for dual-channel bandwidth or distribute modules across all four sockets. Physical dimensions follow the JEDEC DIMM outline, so the latching levers engage normally on the R200 motherboard.

商品特色

  • ECC safeguards data integrity on Dell PowerEdge R200
  • 800 MHz DDR2 speed matches server specifications
  • 4 GB total capacity in a matched 2 x 2 GB kit
  • 8 V operation meets DDR2 voltage requirements
  • 240-pin unregistered DIMM installs directly into R200 slots

商品規格

BrandComputer Memory Solutions
ModelCM256726400ECCNRDR
Capacity4GB (2 x 2GB)
Type240-Pin DDR2 SDRAM
SpeedDDR2 800 (PC2 6400)
CAS LatencyCL6
Timing6-6-6
Voltage1.8V
ECCYes
Buffered/RegisteredUnregistered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell Poweredge R200
Package Content2 Memory RAM Sticks

商品問答

How do I install the 240-pin DDR2 DIMMs into the Dell PowerEdge R200 and what step is often missed?

Power off the server, open the chassis, align each 240-pin module with the slot notch, press firmly until the retention clips click, then verify in BIOS that all 4GB are detected at 800 MHz.

What maintenance or replacement will the ECC non-registered memory need over time?

The modules have no heat spreader and run at 1.8V; keep server fans and air filters clean so temperatures stay within spec, and replace any stick that begins reporting correctable ECC errors.

What limit appears first when the memory runs under sustained load in the R200?

The DDR2-800 CL6 timing and 1.8V voltage set the bandwidth ceiling; sustained workloads will saturate the 6400 MT/s data rate before thermal throttling becomes a factor.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。