我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green 204-pin DDR3 SODIMM module with black chips no heat spreader

Computer Memory Solutions

Computer Memory Solutions 4GB DDR3 1600 CL11 SODIMM memory upgrade

SKU CH-J9YK-4KJ8J

4GB DDR3 1600MHz CL11 SODIMM upgrade for HP Envy Sleekbook 6 series laptops

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • 4GB capacity lifts multitasking headroom for daily workloads
  • DDR3 1600 speed matches the HP Envy Sleekbook specification
  • CL11 timing keeps latency low at 1.5V operation
  • 204-pin SODIMM form factor fits the laptop memory slots directly
  • Tested compatible with Envy Sleekbook 6-1083Ca, 6-1101Es, 6-1110Us, 6-1150Ex

Compatible HP Envy Sleekbook upgrade

This 4 GB DDR3 SODIMM is built for HP Envy Sleekbook 6 models including the 6-1083Ca, 6-1101Es, 6-1110Us and 6-1150Ex. It installs in a 204-pin slot and runs at 1.5 V without ECC or buffering. The single module suits owners who need a straightforward capacity increase for these specific notebooks.

Sustained-load behaviour

Rated at 1600 MHz with CL11 timings of 11-11-11, the stick maintains its specified frequency during extended sessions rather than throttling after a short burst. The unbuffered design keeps latency predictable for everyday multitasking and office workloads. Major-brand chips provide consistent stability across the 12800 MT/s data rate.

Pre-order checklist

Verify your Sleekbook has a free 204-pin DDR3 slot and that the system maximum of 16 GB is not already reached across its two sockets. Confirm the existing memory operates at 1.5 V to match this module. The kit contains one stick, so plan for a second if you intend to populate both channels.

商品特色

  • 4GB capacity lifts multitasking headroom for daily workloads
  • DDR3 1600 speed matches the HP Envy Sleekbook specification
  • CL11 timing keeps latency low at 1.5V operation
  • 204-pin SODIMM form factor fits the laptop memory slots directly
  • Tested compatible with Envy Sleekbook 6-1083Ca, 6-1101Es, 6-1110Us, 6-1150Ex

商品規格

BrandComputer Memory Solutions
ModelCM5126412800SODRH
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp Envy Sleekbook 6-1083Ca, 6-1101Es, 6-1110Us, 6-1150Ex
Package Content1 Memory RAM Stick

商品問答

Does the 1.5 V DDR3 module run hot or draw much power during continuous use?

Standard DDR3 at 1.5 V is a low-voltage design that stays cool and draws minimal power even under all-day workloads.

Which slot and motherboard does the 204-pin SODIMM need to work in my laptop?

It fits any 204-pin DDR3 SO-DIMM slot and is validated for HP Envy Sleekbook 6-1083Ca, 6-1101Es, 6-1110Us and 6-1150Ex systems.

Can I pair this CL11 1600 MHz stick with the factory memory already in the second socket?

Yes, the module matches the DDR3 1600 specification used in those Sleekbook models, so it will run together with the original memory.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。