我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green rectangular SODIMM circuit board with black memory chips and gold edge connector

Computer Memory Solutions

Computer Memory Solutions 512MB DDR 266 PC2100 SODIMM memory upgrade B106

SKU CH-ZM9T-EJTFV

512 MB DDR 266 PC2100 SODIMM upgrade for HP LaserJet 4250 and 5200 series printers

  • Capacity512MB
  • SpeedDDR 266 (PC 2100)
  • CAS LatencyCL2.5
  • Timing3-3-3
  • Voltage2.5V
  • ECCNo
  • 512 MB DDR 266 PC2100 capacity for faster printer processing
  • 100-pin SODIMM form factor fits HP LaserJet 4250 and 5200 series
  • CL2.5 latency with 3-3-3 timing delivers responsive memory access
  • Unbuffered non-ECC design matches original printer specifications
  • 5 V operation ensures stable performance in compatible HP printers

512MB DDR 266 SODIMM for HP LaserJet printers

This module is a 512MB DDR 266 (PC 2100) SODIMM built for specific HP LaserJet printers. It targets IT staff or owners who need to upgrade memory in a 4250 or 5200 series device. The stick uses a 100-pin SODIMM form factor and carries no ECC or registered buffering.

Thermals noise and power draw

The memory runs at 2.5V with CL2.5 3-3-3 timings and has no heat spreader. As a low-power DRAM module it produces negligible heat and no audible noise during normal printer operation. Power draw stays within the printer's original specification so no extra cooling is required.

Build quality connectors and daily implications

The 100-pin SODIMM edge connector slots directly into the printer's memory socket without adapters. Unbuffered design keeps installation straightforward for on-site service. Compatibility is guaranteed for the listed 4250 and 5200 models only; other printers are not supported.

商品特色

  • 512 MB DDR 266 PC2100 capacity for faster printer processing
  • 100-pin SODIMM form factor fits HP LaserJet 4250 and 5200 series
  • CL2.5 latency with 3-3-3 timing delivers responsive memory access
  • Unbuffered non-ECC design matches original printer specifications
  • 5 V operation ensures stable performance in compatible HP printers

商品規格

BrandComputer Memory Solutions
ModelCM512MBPC2100100PIN
Capacity512MB
SpeedDDR 266 (PC 2100)
CAS LatencyCL2.5
Timing3-3-3
Voltage2.5V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp Laserjet 4250, 4250Dtn, 4250Dtnsl, 4250N, 4250Tn, 5200Dtn
Package Content1 Memory RAM Stick

商品問答

How do I install the 100-pin SODIMM in an HP LaserJet 4250, and which step do people often miss?

Power off the printer, open the formatter board cover, align the notch on the 100-pin SODIMM with the slot key, press firmly until both latches click, then close the cover and power on; the step most often missed is seating the module fully so both metal latches engage.

What maintenance or replacement will the 512 MB DDR 266 module need over time?

No scheduled maintenance is required; if errors appear, reseat the SODIMM and clean the gold contacts with a lint-free cloth, otherwise the module runs for the life of the printer unless a hardware fault develops.

What limit appears first when the printer runs large, complex jobs continuously with this memory?

The 512 MB capacity is the first bottleneck; once the print buffer fills, the printer pauses to spool to disk, so sustained throughput is limited by the amount of installed RAM rather than the 266 MHz speed.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。