我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green 100-pin SODIMM memory module with black chips

Computer Memory Solutions

Computer Memory Solutions 512MB DDR 333 PC2700 100-pin SODIMM memory upgrade for Lexmark T644 T650 T652

SKU CH-8B5B-Z01E0

512 MB DDR 333 PC2700 100-pin SODIMM module for Lexmark T644, T650 and T652 printers

  • Capacity512MB
  • SpeedDDR 333 (PC 2700)
  • CAS LatencyCL2.5
  • Timing3-3-3
  • Voltage2.5V
  • ECCNo
  • 512 MB capacity adds headroom for large print jobs
  • DDR 333 (PC 2700) speed keeps data moving quickly
  • 100-pin SODIMM form factor fits Lexmark T644, T650 and T652 printers
  • Unbuffered non-ECC design installs without extra configuration
  • Major-brand chipset and 2.5 V operation deliver reliable performance

512 MB SODIMM for Lexmark printers

This 512 MB DDR 333 PC2700 module is built as a direct memory upgrade for Lexmark T644, T650 and T652 series printers. It uses a 100-pin SODIMM form factor with unbuffered, non-ECC chips running at 2.5 V. The stick installs into the printer’s existing memory slots to increase the available workspace for print jobs and fonts.

Capacity and headroom

Each socket accepts a maximum of 512 MB, and the printer supports two sockets for a total ceiling of 1 GB. This single module fills one slot completely, leaving the second socket open for a matching stick if the full 1 GB is required. Workloads that exceed the installed amount will fall back to slower internal buffering.

Fit in your build

The module requires a free 100-pin SODIMM slot in a compatible Lexmark T644, T650 or T652 device and operates at the standard 2.5 V DDR voltage. No heat spreader is fitted, so clearance is minimal. It adds no ECC or registered signalling, keeping the electrical load identical to the factory memory it replaces.

商品特色

  • 512 MB capacity adds headroom for large print jobs
  • DDR 333 (PC 2700) speed keeps data moving quickly
  • 100-pin SODIMM form factor fits Lexmark T644, T650 and T652 printers
  • Unbuffered non-ECC design installs without extra configuration
  • Major-brand chipset and 2.5 V operation deliver reliable performance

商品規格

BrandComputer Memory Solutions
ModelCM512MBPC2700100PIN
Capacity512MB
SpeedDDR 333 (PC 2700)
CAS LatencyCL2.5
Timing3-3-3
Voltage2.5V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemLexmark T644 Series, T644Dtn, T644N, T644Tn, T650N
Package Content1 Memory RAM Stick

商品問答

Will this 100-pin SODIMM work with the existing memory already installed in my Lexmark T644 printer?

This module is designed for the Lexmark T644, T650 and T652 series and runs at DDR 333 (PC2700) with CL2.5 timing and 2.5V. Matching those specifications with your current DIMM will give the best stability.

How can I verify the 512MB DDR 333 module is recognised correctly after I install it?

Power on the printer and check the configuration page or control-panel memory report; it should show the total system memory increased by 512MB and list the speed as PC2700 333MHz.

What comes in the package and is anything else required to complete the upgrade?

The box contains one 512MB 100-pin SODIMM stick. No additional parts or cables are needed for installation in the compatible Lexmark printers.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。