我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Single green circuit board with black memory chips gold edge connector no heat spreader

Computer Memory Solutions

Computer Memory Solutions CM2048642400SO 16GB DDR4 2400 SODIMM

SKU CH-C51X-3Y57F

16 GB DDR4 2400 SODIMM module for Synology DS1819+ expansion up to 32 GB

  • Capacity16GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Timing17-17-17
  • Voltage1.2V
  • 16 GB DDR4 2400 MHz module upgrades Synology DS1819+ capacity
  • CL17 timing and 1.2 V operation keep latency low and power draw minimal
  • 260-pin SODIMM form factor fits the four expansion slots in your DS1819+
  • Unbuffered non-ECC design matches the memory specification for this NAS
  • Single 16 GB stick allows flexible population up to 32 GB maximum

Compatible upgrade for Synology DS1819+

This 16GB DDR4 SODIMM module is built for the Synology DiskStation DS1819+ NAS. It delivers a single 16GB stick that fits the system's 260-pin slots and supports the platform's maximum memory configuration. The module is designed for administrators expanding capacity on this specific model. It is not suited for desktop PCs, laptops or other NAS units that require different form factors or voltage levels.

Unbuffered non-ECC design with major-brand chips

The stick uses unbuffered, non-ECC memory built on a major-brand chipset in a 2Rx8 organisation. It operates at the standard 1.2V DDR4 voltage and installs directly into any of the four available SODIMM sockets without extra cabling or adapters. The low-profile design has no heat spreader, so it clears tight drive bays and chassis lids common in compact NAS enclosures.

CL17 timing at 2400MHz within standard power

Rated at DDR4 2400 (PC4 19200) with 17-17-17 latency, the module runs at the JEDEC-defined speed and voltage for this platform. Power draw stays at the nominal 1.2V level, keeping thermal output low inside the passively cooled DiskStation chassis. Acoustic impact is negligible because the NAS relies on system fans rather than module-mounted cooling.

商品特色

  • 16 GB DDR4 2400 MHz module upgrades Synology DS1819+ capacity
  • CL17 timing and 1.2 V operation keep latency low and power draw minimal
  • 260-pin SODIMM form factor fits the four expansion slots in your DS1819+
  • Unbuffered non-ECC design matches the memory specification for this NAS
  • Single 16 GB stick allows flexible population up to 32 GB maximum

商品規格

BrandComputer Memory Solutions
ModelCM2048642400SO
Capacity16GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Timing17-17-17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemSynology DiskStation DS1819+
Package Content1 Memory RAM Stick

商品問答

Does the DDR4-2400 SO-DIMM run at the full 2400 MHz speed in a Synology DS1819+?

The module is rated for DDR4-2400 (PC4-19200). The DS1819+ memory controller supports up to 2400 MHz, so the stick will operate at its rated 2400 MHz speed.

Will this 260-pin SODIMM fit the four memory slots in a Synology DS1819+?

Yes. The DS1819+ has four 260-pin DDR4 SO-DIMM slots and this stick uses the standard 260-pin SO-DIMM form factor, so it installs directly into any slot.

How is the module installed in the DS1819+, and what step do people often miss?

Power off the NAS, remove the drive trays, open the chassis cover, insert the SODIMM at an angle into a free slot until the gold contacts are hidden, then press down firmly until the side clips click. The step often missed is pressing down hard enough to fully engage both retention clips.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。