BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00280417BTC
現貨
Cooler Master
Cooler Master MWE Gold V2 1050W ATX 3.0 power supply MPE-A501-AFCAG-3US
A 1050 W ATX 3.0 power supply with a 12VHPWR connector, 80 PLUS Gold efficiency and a fully modular cable set
- ColorBlack
- TypeATX / ATX 3.0 Compatible
- Maximum Power1050 W
- Fans1 x 140 mm silent fan
- PFCActive
- Main Connector24Pin
- ATX 3.0 ready with 12VHPWR delivering up to 600W to a GPU
- 80 PLUS Gold efficiency reaches 90 percent at typical load
- Fully modular flat cables cut clutter and improve airflow
- 140 mm fan with Cybenetics Standard+ rating keeps noise low
- Japanese capacitors and full protection suite boost reliability
1050W ATX 3.0 power supply
This Cooler Master MWE Gold V2 unit delivers 1050 W of continuous power with 80 PLUS Gold efficiency. It targets builders who need reliable energy for high-end graphics cards and multi-drive workstations. The fully modular design keeps cable routing clean and improves airflow inside the chassis.
140 mm fan and Japanese capacitors
A 140 mm silent fan with two ball bearings provides steady cooling while the all-Japanese capacitor lineup reduces ripple noise and supports long-term stability. Full modularity means only the required cables stay in the case, and the 12VHPWR connector is included for modern GPU power delivery.
180 mm depth and connector count
The power supply measures 180 mm in length, so verify that your case can accommodate that depth before ordering. Check that your motherboard accepts both an EPS 4+4 pin and an EPS 8 pin connector, and confirm you have enough SATA ports for the twelve SATA power plugs supplied.
商品特色
- ATX 3.0 ready with 12VHPWR delivering up to 600W to a GPU
- 80 PLUS Gold efficiency reaches 90 percent at typical load
- Fully modular flat cables cut clutter and improve airflow
- 140 mm fan with Cybenetics Standard+ rating keeps noise low
- Japanese capacitors and full protection suite boost reliability
商品規格
| Brand | Cooler Master |
|---|---|
| Series | MWE Gold V2 |
| Model | MPE-A501-AFCAG-3US |
| Color | Black |
| Type | ATX / ATX 3.0 Compatible |
| Maximum Power | 1050 W |
| Fans | 1 x 140 mm silent fan |
| PFC | Active |
| Main Connector | 24Pin |
| PCI-Express Connector | 3 x 6+2-Pin |
| SATA Power Connector | 12 |
| Max PSU Length | 180 mm |
| Modular | Full Modular |
| Power Good Signal | 100-150ms |
| Hold-up Time | >=16ms at 100% Load |
| Efficiency | >= 90% @ Typical Load |
| Energy-Efficient | 80 PLUS GOLD Certified |
| PSU Noise Level | Cybenetics Standard + |
| Protection | OVP / OPP / SCP / OCP / UVP / OTP / Inrush Protection |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 13~6A |
| Output | +3.3V@20A, +5V@20A, [email protected] , [email protected] , +12V@3A |
| MTBF | >100,000 Hours |
| Approvals | TUV,cTUVus,CE,FCC,BSMI,CCC, EAC,RCM,UKCA,BIS |
| Connectors | 1 x ATX 24 Pin (650mm) 1 x EPS 4+4 Pin (650mm) 1 x EPS 8 Pin (650mm) 3 x PCI-e 6+2 Pin = 3x (550mm) 12 x SATA = 3 x (500+120+120+120mm) 4 x Peripheral 4 Pin = 1x (500+120+120+120mm) 1 x 12VHPWR (650mm) |
| Features | • Fully support ATX3.0: 12VHPWR connector with a compact 12+4 pin cable can pump up to 600W of power to a GPU via a single cable. • Highly Efficient Performance: The 80 PLUS Gold certification guarantees a minimum efficiency of 90%. • 140mm Two Ball Bearing Fan: MWE Gold 1250 – V2 has delivered to a premium high air flow and long life bearing fan, offering more effective cooling performance. • 100% Japanese Capacitors: Implementing the highest quality of Japanese capacitors to increase efficiency and reduce ripple noise. • Fully Modular: Modular flat black cables reduce clutter, incr |
| Dimensions | 7.09 x 5.91 x 3.39" |
| Weight | 6.459 lbs |
| Package Content | MWE Gold 1050 V2 Connectors Power Cord 4x screws Manuel |
| 出貨重量 | 2.93 kg |
| 包裝尺寸 | 180 × 150 × 86 mm |
商品問答
What does the ATX 3.0 12VHPWR connector on this unit deliver in practice?
The 12VHPWR cable supplies up to 600 W to a graphics card through a single 12+4 pin connection.
What clearance does the 180 mm length require inside the case?
The power supply measures 180 mm long, so the case must provide at least that much depth behind the mounting bracket.
How are the fully modular cables attached, and which step is often missed?
Plug only the cables you need into the labelled ports on the PSU side; the step people skip is seating each connector until it clicks.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
