我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black 80W soldering iron kit with brass tips and stand, 10.7 x 4.1 x 2 inches, 0.31 kg

Creality PTSI-80 21-in-1 3D Printer Smoothing Tool Kit 80W Soldering Iron

SKU CH-8P8Z-WZPP2

A 21-in-1 kit with an 80 W ceramic iron, nine smoothing tips, seven insert tips from M2 to M8, plus stand, sponge and sanding sticks for post-processing prints

  • ColorBlack
  • TypeFilament
  • Compatible SystemWindows, macOS, Linux
  • SpecificationBrass, Ceramic, 10.7 L x 4.1 W x 2 H inches, black and silve
  • FeaturesBrass, Ceramic, Polylactic Acid, brass, rubber
  • 21-piece kit covers smoothing, inserts and light soldering
  • 80W ceramic core heats faster than 60W tools
  • Digital display sets precise 180–500°C temperature range
  • Seven insert tips M2–M8 plus M2.5 fit many nuts
  • Includes stand, sponge and sanding sticks for tidy workflow

All-in-one post-processing kit

The Creality PTSI-80 bundles 21 tools for 3D print finishing and light electronics work. It supplies 9 brass smoothing tips, 7 heat-set insert tips from M2 to M8 including the M2.5 size, a brass adapter, sanding sticks, a cleaning sponge and a safety stand. Makers who need smoothing, plastic repair, filament welding and threaded insert installation in one package will find the essentials here.

80W ceramic heater with digital control

The 80W ceramic core heats faster and holds temperature more steadily than common 60W alternatives. An LED display lets you set precise targets from 180°C to 500°C (356°F to 932°F) to match PLA, PETG, ABS and other filaments. A heat-resistant silicone grip and the included metal stand improve everyday handling safety.

Sustained temperature stability for long sessions

The higher wattage maintains thermal equilibrium during extended smoothing passes or repeated insert installations without the droop seen on lower-power irons. There is no auto shut-off, so the unit stays at the chosen temperature until you manually power it down. The brass tips and ceramic construction resist wear through repeated heating cycles.

商品特色

  • 21-piece kit covers smoothing, inserts and light soldering
  • 80W ceramic core heats faster than 60W tools
  • Digital display sets precise 180–500°C temperature range
  • Seven insert tips M2–M8 plus M2.5 fit many nuts
  • Includes stand, sponge and sanding sticks for tidy workflow

商品規格

BrandCreality
ModelPTSI-80
Part Numbersolderingironkit
ColorBlack
TypeFilament
Compatible SystemWindows, macOS, Linux
SpecificationBrass, Ceramic, 10.7 L x 4.1 W x 2 H inches, black and silver, 0.31 kilograms, PTSI-80, solderingironkit
FeaturesBrass, Ceramic, Polylactic Acid, brass, rubber

商品問答

How do I install the brass tip and insert tip on the 80 W iron, and which step is often missed?

Screw the brass adapter into the barrel, thread the chosen tip into the adapter, then tighten both with pliers while cold; the step people skip is re-tightening after the first heat cycle because thermal expansion loosens the joint.

What maintenance will the 7 insert tips (M2–M8, including M2.5) and 9 smoothing tips need over time?

Wipe hot tips on the included high-temp sponge after every use; when brass wears or deform, replace individual tips — no calibration or internal servicing is required.

What limit appears first during long smoothing sessions at 500 °C?

The ceramic core holds temperature, but the brass tips saturate with heat and transfer it to the silicone grip, so you must pause to let the handle cool before continuing.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。