我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

DELL

DELL H962F WD2502ABYS 250GB 7200RPM 3Gbps 3.5" SATA internal hard drive

SKU CH-GSJA-PWK7A

Enterprise-grade 250 GB 7200 RPM SATA drive with 16 MB cache, supplied in a lot of ten with 3.5-inch caddies

  • Enterprise-certified for Dell PowerEdge and PowerVault systems
  • 7200 RPM spindle speed for responsive data access
  • 16 MB cache buffer smooths burst workloads
  • Includes R-series caddy for tool-less 3.5-inch bay installation
  • Supplied as a lot of 10 drives with zero hours

250 GB SATA enterprise drive

The Dell H962F is a 3.5 inch internal hard drive built for Dell PowerEdge and PowerVault systems. It delivers 250 GB of storage at 7200 RPM with a 16 MB cache on a 3 Gb/s SATA interface. The drive ships new with zero hours and includes an R Series caddy for direct installation.

R Series caddy and SAS bay fit

Each unit comes pre-mounted in a Dell R Series tray that slides into 3.5 inch SAS or SATA drive bays without extra hardware. Enterprise validation means the firmware and mechanical tolerances are qualified for continuous operation in Dell storage arrays. The SATA connector aligns with standard backplanes for hot-plug service.

Replaces failed array members

This drive restores capacity in certified Dell enclosures where a matching part number is required for RAID rebuilds. The jump is worth it when the array demands a Dell-qualified SATA spindle with the original 7200 RPM spec. It does not serve builds that need larger capacities or 6 Gb/s throughput.

商品特色

  • Enterprise-certified for Dell PowerEdge and PowerVault systems
  • 7200 RPM spindle speed for responsive data access
  • 16 MB cache buffer smooths burst workloads
  • Includes R-series caddy for tool-less 3.5-inch bay installation
  • Supplied as a lot of 10 drives with zero hours

商品規格

本商品目前尚未公佈規格。

商品問答

What practical speed ceiling does the 3 Gb/s SATA interface impose on this drive?

The 3 Gb/s SATA link caps the maximum burst transfer rate at the interface level, while sustained throughput from the 7200 RPM platters will be lower than that ceiling.

What physical mounting hardware is required for the 3.5-inch form factor in a Dell system?

The drive includes an R Series caddy or tray that slides into a 3.5-inch SAS or SATA drive bay on compatible PowerEdge or PowerVault platforms.

Which installation step is most often missed when fitting this drive into a Dell server?

Securing the drive inside the supplied R Series caddy before inserting the assembly into the hot-swap bay is the step most frequently overlooked.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。