我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

DELL

DELL ST3000NM0033 3TB 7.2K 6Gb/s 128MB 3.5" SATA internal hard drive

SKU CH-2WEV-JT78A

A 3 TB 3.5" SATA hard drive spinning at 7200 RPM with 128 MB cache for server storage

  • 3 TB capacity stores large data sets
  • 7200 RPM spindle speed enables fast sequential access
  • 128 MB cache buffers bursts for smoother throughput
  • 6 Gb/s SATA interface connects to standard server backplanes
  • 5 inch form factor fits conventional drive bays

Server-grade 3 TB SATA drive

This is a 3.5-inch SATA hard drive with a 3000 GB capacity, 7200 RPM spindle speed and 128 MB cache. It is built on the Seagate Constellation ES.3 platform and supplied under the Dell ST3000NM0033 part number. The drive connects via a 6 Gb/s SATA interface and is intended for internal server deployment.

Suited for array workloads not desktop boot

The drive targets RAID arrays, NAS units and other multi-drive server environments that benefit from enterprise firmware and vibration tolerance. It is not aimed at single-drive desktop boot or gaming workloads where lower power draw or acoustic tuning are priorities.

3000 GB capacity at 7200 RPM

The single specification that decides fit is the 3000 GB capacity combined with a 7200 RPM spindle speed on a 6 Gb/s SATA interface. Buyers needing a different capacity, a lower spindle speed or a non-SATA interface should look at other models.

商品特色

  • 3 TB capacity stores large data sets
  • 7200 RPM spindle speed enables fast sequential access
  • 128 MB cache buffers bursts for smoother throughput
  • 6 Gb/s SATA interface connects to standard server backplanes
  • 5 inch form factor fits conventional drive bays

商品規格

本商品目前尚未公佈規格。

商品問答

How much noise and heat does the 7200 RPM spindle produce during continuous operation?

The drive spins at 7200 RPM with a 6 Gb/s SATA interface and 128 MB cache; typical enterprise 3.5″ drives at this speed run at moderate acoustics and require standard chassis airflow.

What host connector and power cables must already be present for this 3.5″ SATA drive?

A free SATA data port on the motherboard or controller plus a SATA power connector from the supply are required; the drive uses the standard 3.5″ SATA 6 Gb/s interface.

Will this 3 TB Constellation ES.3 work in an older desktop that only supports SATA 3 Gb/s?

Yes, the 6 Gb/s SATA interface is backward compatible with 3 Gb/s ports; the drive will operate at the slower link speed while providing 3000 GB capacity.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。