SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502024BTC
現貨
E-POWER
E-POWER EP-600-TD2 600 W ATX power supply
A 600 W ATX unit with dual 12 V rails and PCIe connectors for graphics cards
- TypeATX12V
- Maximum Power600 W
- Fans1
- PFCNo
- Main Connector20+4Pin
- +12V Rails2
- Reliable 600 W output powers mainstream gaming PCs
- Dual 12 V rails with 20 A each feed graphics cards
- 6-pin and 6+2-pin PCIe connectors support demanding GPUs
- 100 % Hi-Pot tested with short-circuit protection on all outputs
- Universal 100-240 V input works at 50 Hz or 60 Hz
600 W ATX power supply for mainstream builds
The E-POWER EP-600-TD2 delivers up to 600 W from a standard ATX12V form factor. It uses dual +12 V rails rated at 20 A each alongside +3.3 V and +5 V rails at 24 A. A single 120 mm fan provides airflow while the unit carries UL, CSA, CE, CB and FCC approvals.
Suited to office PCs and mid-range gaming rigs
This unit fits builders who need a 6-pin and a 6+2-pin PCIe connector for a single graphics card. It is not for systems that require modular cabling, active PFC or support for multi-GPU configurations. The fixed cable set includes six Molex, four SATA and one floppy connector.
Behaviour under sustained load
Low ripple and noise are maintained across the output range and every unit passes a 100 % Hi-Pot test. Short-circuit protection operates on all rails and the dual +12 V design splits the load between two 20 A circuits. The fan speed ramps to keep temperatures stable during extended operation.
商品特色
- Reliable 600 W output powers mainstream gaming PCs
- Dual 12 V rails with 20 A each feed graphics cards
- 6-pin and 6+2-pin PCIe connectors support demanding GPUs
- 100 % Hi-Pot tested with short-circuit protection on all outputs
- Universal 100-240 V input works at 50 Hz or 60 Hz
商品規格
| Brand | ePOWER |
|---|---|
| Model | EP-600-TD2 |
| Type | ATX12V |
| Maximum Power | 600 W |
| Fans | 1 |
| PFC | No |
| Main Connector | 20+4Pin |
| +12V Rails | 2 |
| PCI-Express Connector | 1 x 6-Pin, 1 x 6+2-Pin |
| SLI | No |
| Modular | No |
| Over Voltage Protection | Yes |
| Input Voltage | 100 - 120 V / 200 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 10A @ 115V, 6A @ 230V |
| Output | +3.3V@24A,+5V@24A,+12V1@20A,+12V2@20A, [email protected] , [email protected] |
| Approvals | UL, CSA, CE, CB, FCC |
| Connectors | 1 x Main connector (20+4Pin) 1 x 12V (P4) 6 x 4pin Molex 4 x SATA 1 x Floppy 2 x PCI-E |
| Features | Black case Low ripple and noise 100% Hi-Pot Tested Short circuit protection on all outputs |
| 出貨重量 | 3.08 kg |
| 包裝尺寸 | 292 × 229 × 102 mm |
商品問答
What motherboard power connector does the EP-600-TD2 require to work?
The unit supplies a 20+4 pin main connector that fits standard ATX12V motherboards.
Can I keep my older IDE drives when installing this power supply?
Six 4-pin Molex connectors and one floppy connector are provided for legacy drives.
How do I verify the dual 12 V rails are delivering power after setup?
Each rail is rated for 20 A and the unit includes over-voltage and short-circuit protection on all outputs.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
