我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Deep Purple72 spool of 1.75mm 3D printing filament, 750g, glossy purple plastic wound on a recyclable reel

E3D Online

E3D Online spoolWorks EDGE Filament 1.75mm 750g Deep Purple72

SKU CH-MPPP-JE4TC

PETG-based filament combining ABS toughness with PLA ease of use, 1.75mm diameter, 750g spool in Deep Purple72

  • ColorPurple
  • TypeFilament
  • Recyclable PETG-based material reduces environmental impact
  • 750 g spool provides ample length for extended prints
  • Easy printing with no unpleasant fumes or odours
  • Strong layer adhesion yields parts nearly as strong between layers
  • Low contraction minimises warp for accurate overhangs and tight bridges

Edge PETG Filament 1.75 mm

This 1.75 mm Edge filament from E3D is a PETG-based material modified for high toughness and low warping. It targets makers who want ABS-like strength with the easier printing behaviour of PLA. The 750 g spool suits regular production runs on most desktop FDM printers. Buyers who need a different diameter or a much larger spool will not be served by this listing.

Low odour and minimal warping

The material prints with no unpleasant fumes or odours, keeping the workspace comfortable during long jobs. Its super-low contraction reduces warp so parts stay dimensionally accurate without an actively heated chamber. Strong layer adhesion at a molecular level means inter-layer strength nearly matches in-plane strength. Users who require a fully enclosed printer for high-temperature polymers will not need one here.

Gluestick bed adhesion and Scaffold pairing

A light coating of ordinary gluestick is enough for reliable first-layer grip on common bed surfaces. The filament is designed to pair with E3D Scaffold support material for clean breakaway on complex overhangs and bridges. The spool itself is recyclable, supporting easier waste handling. Printers that rely on proprietary cartridge systems or non-standard filament diameters cannot use this spool.

商品特色

  • Recyclable PETG-based material reduces environmental impact
  • 750 g spool provides ample length for extended prints
  • Easy printing with no unpleasant fumes or odours
  • Strong layer adhesion yields parts nearly as strong between layers
  • Low contraction minimises warp for accurate overhangs and tight bridges

商品規格

BrandE3D
ModelEdge
ColorPurple
TypeFilament

商品問答

How do I load the 1.75mm filament and what step do users often miss?

Heat the nozzle to the PETG printing temperature, feed the 1.75mm strand until it extrudes cleanly, then apply a thin layer of gluestick to the bed — skipping the gluestick is the step most people forget.

What maintenance or replacement will this 750g spool need later?

The spool itself is recyclable; once the 750g of filament is used up you simply recycle the empty spool and replace it with a new roll — no other consumable parts are involved.

What limit appears first during a long print with this PETG-based material?

The 750g spool capacity is the first hard limit — extremely large or many consecutive prints will exhaust the filament before any thermal or mechanical limit of the material is reached.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。