我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
White filament dryer box with transparent lid, 110V US plug

eSUN

eSUN eBOX Lite Upgraded Filament Dryer Box 110V 3D printers accessory

SKU CH-QFK1-WBABB

Keeps 1 kg filament spools dry at 40–55 °C with even PI heating and a low-noise fan for reliable 3D printing

  • ColorWhitie
  • Type3D Filament Box
  • Compatible SystemFor 1KG Filament
  • Specification110V
  • Keeps hygroscopic filament dry with constant temperature and humidity control
  • Heats evenly to 50-55°C in two hours using PI Arc heating and insulation
  • Quiet turbo fan enables overnight drying and long-term storage
  • Fits 1.75, 2.85 and 3.00 mm spools up to 200×73 mm with transparent lid
  • Adjustable 40-55°C range with 0-18 hour timer via simple button controls

eSUN eBOX Lite Filament Dryer Box

The eSUN eBOX Lite is an upgraded filament dryer and storage box designed for 3D printing enthusiasts who work with hygroscopic materials. It maintains a constant temperature and humidity environment to prevent moisture-related print failures. The unit accommodates spools up to 1 kg and supports filament diameters of 1.75 mm, 2.85 mm and 3.00 mm. A transparent lid allows visual monitoring without opening the chamber.

Check 110V power and spool dimensions before

Verify that your workspace has a 110V US plug outlet available for the unit. The internal cavity measures 200 mm by 73 mm, so confirm your spool diameter and width fit within this envelope. The dryer operates with a temperature range of 40 to 55 degrees and a timer adjustable from 0 to 18 hours. Ensure the low-noise turbo fan sound level is acceptable for your intended location.

Suits makers drying 1 kg spools of common diameters

This dryer suits users who need to keep 1 kg spools of 1.75 mm, 2.85 mm or 3.00 mm filament dry and ready to print. It is not for buyers who require simultaneous drying of multiple spools or spools exceeding the 200 by 73 mm internal limit. Users needing higher temperature settings above 55 degrees or timer ranges beyond 18 hours should look at other solutions.

商品特色

  • Keeps hygroscopic filament dry with constant temperature and humidity control
  • Heats evenly to 50-55°C in two hours using PI Arc heating and insulation
  • Quiet turbo fan enables overnight drying and long-term storage
  • Fits 1.75, 2.85 and 3.00 mm spools up to 200×73 mm with transparent lid
  • Adjustable 40-55°C range with 0-18 hour timer via simple button controls

商品規格

BrandeSun
ColorWhitie
Type3D Filament Box
Compatible SystemFor 1KG Filament
Specification110V

商品問答

Does the eBOX Lite come with filament or just the dryer box?

The package contains the dryer box itself; filament spools are sold separately.

Which spool sizes fit inside the 200×73 mm chamber?

It accepts 0.5 kg, 0.75 kg and 1 kg spools of 1.75 mm, 2.85 mm or 3.00 mm filament.

What does the 50–55 °C range mean for a typical PLA spool?

The heater reaches 50–55 °C in about two hours and can hold that temperature for up to 18 hours to dry PLA and other hygroscopic materials.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。