SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501144BTC
現貨
GIGABYTE
GIGABYTE GV-N2080WF3-8GC GeForce RTX 2080 graphics card
GeForce RTX 2080 graphics card with 8 GB GDDR6 memory, 2944 CUDA cores and a 1710 MHz core clock, driving up to four displays via HDMI 2.0b, three DisplayPort 1.4 outputs and a USB Type-C
- InterfacePCI Express 3.0 x16
- Chipset ManufacturerNVIDIA
- GPU SeriesNVIDIA GeForce RTX 20 Series
- GPUGeForce RTX 2080
- Core Clock1710 MHz
- CUDA Cores2944
- 8 GB GDDR6 memory enables high-resolution textures
- 2944 CUDA cores accelerate parallel workloads
- 1710 MHz core clock drives fast frame rates
- Four display outputs support multi-monitor setups
- 7680 x 4320 resolution at 60 Hz for 8K output
GIGABYTE GV-N2080WF3-8GC GeForce RTX 2080
This GIGABYTE graphics card uses the NVIDIA GeForce RTX 2080 GPU with 2944 CUDA cores and a 1710 MHz core clock. It connects via a PCI Express 3.0 x16 slot and occupies a dual-slot width. The board measures 11.04 inches by 4.58 inches and targets users building high-resolution gaming or creative workstations.
8GB 256-Bit GDDR6 Memory Configuration
The card provides 8GB of GDDR6 memory running at an effective 14000 MHz across a 256-bit bus. This capacity handles 1440p and entry-level 4K gaming textures comfortably. Heavy 4K assets or multi-application VR workloads may exceed the frame buffer and force texture streaming over the PCIe link.
PCI Express 3.0 x16 and Display Interface Limits
The PCI Express 3.0 x16 interface delivers up to 16 GT/s per lane for host transfers. Display outputs include three DisplayPort 1.4 ports, one HDMI 2.0b port and a USB Type-C VirtualLink connector. Together they drive up to four monitors at a maximum 7680 x 4320 resolution at 60 Hz.
商品特色
- 8 GB GDDR6 memory enables high-resolution textures
- 2944 CUDA cores accelerate parallel workloads
- 1710 MHz core clock drives fast frame rates
- Four display outputs support multi-monitor setups
- 7680 x 4320 resolution at 60 Hz for 8K output
商品規格
| Brand | GIGABYTE |
|---|---|
| Model | GV-N2080WF3-8GC |
| Interface | PCI Express 3.0 x16 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 20 Series |
| GPU | GeForce RTX 2080 |
| Core Clock | 1710 MHz |
| CUDA Cores | 2944 |
| Effective Memory Clock | 14000 MHz |
| Memory Size | 8GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 |
| OpenGL | OpenGL 4.5 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.0b |
| DisplayPort | 3 x DisplayPort 1.4 |
| Other Ports | 1 x USB Type-C (support VirtualLink) |
| Max Resolution | 7680 x 4320 @ 60 Hz |
| SLI Support | 2-way NVIDIA NVLINK |
| Virtual Reality Ready | Yes |
| Thermal Design Power | 215W |
| System Requirements | System PSU Limitation: 650W |
| Power Connector | 1 x 6-Pin, 1 x 8-Pin |
| Features | Powered by GeForce RTX 2080//Integrated with 8GB GDDR6 256-bit memory interface//WINDFORCE 3X Cooling System with alternate spinning fans//RGB Fusion 2.0 - synchronize with other AORUS devices//Metal Back Plate |
| Form Factor | ATX |
| Max GPU Length | 280 mm |
| Card Dimensions (L x H) | 11.04" x 4.58" |
| Slot Width | 2 Slots |
商品問答
Will the PCI Express 3.0 x16 interface run on my older motherboard that only has PCIe 2.0 slots?
The card uses a PCI Express 3.0 x16 interface which is backward compatible with PCIe 2.0 motherboards, though bandwidth will be limited to the older standard.
How can I verify the 1710 MHz core clock is active after installing the drivers?
Open GPU-Z or the NVIDIA Control Panel and check the sensor tab; the boost clock should read 1710 MHz under full 3D load.
Does the box include a USB Type-C cable for the VirtualLink port or do I need to buy one separately?
The card ships with the graphics card and driver media only; a USB Type-C cable for the VirtualLink port must be purchased separately.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
