SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
HGST
A 750 GB 3.5-inch desktop hard drive spinning at 7200 RPM with 32 MB cache and a SATA 3.0Gb/s interface
The HGST Deskstar 7K1000 is a 750GB 3.5-inch internal hard drive built for desktop PCs and workstations. It connects over a SATA 3.0Gb/s interface and spins at 7200 RPM with a 32MB cache. The bare-drive packaging suits system builders and upgraders who need primary or secondary bulk storage. Buyers who want solid-state speed or capacities above 750GB will need a different drive.
The 750GB platter array handles operating systems, applications, media libraries and backups in a single volume. Sequential throughput is limited by the SATA 3.0Gb/s link and the 7200 RPM spindle, so sustained transfers top out well below modern SSD speeds. Random access averages 8.5ms seek time and 4.17ms latency, which is adequate for everyday workloads but not for heavy multi-user databases. The 32MB buffer absorbs burst writes but cannot compensate for the mechanical rotation delay.
Thermal monitoring and fly-height control adjust head position to maintain reliability across temperature changes. Three low-power idle modes reduce draw when the drive is not active, and the ramp-load design parks heads safely during power-off. Silent seek acoustics keep operating noise low in typical desktop chassis. Power consumption varies with workload but stays within standard 3.5-inch hard-drive envelopes.
| Brand | Hitachi GST |
|---|---|
| Series | Deskstar 7K1000 |
| Model | HDS721075KLA330 (0A35154) |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 750GB |
| RPM | 7200 RPM |
| Cache | 32MB |
| Average Seek Time | 8.5ms |
| Average Latency | 4.17ms |
| Features | Perpendicular magnetic recording technology Ramp load design increases shock protection and power savings Thermal monitoring and fly height control enhance reliability Three low-power idle modes boost power efficiency Silent seek acoustics achieve ultra-quiet operation Host/drive authentication for hardware security |
| Form Factor | 3.5" |
| 出貨重量 | 0.91 kg |
| 包裝尺寸 | 203 × 152 × 51 mm |
Yes, the SATA 3.0Gb/s interface is backward compatible with SATA 1.5Gb/s ports, so the drive will operate at the slower speed on older hardware.
Use a system information tool or BIOS to confirm the model HDS721075KLA330 is detected, then check the reported rotation speed and cache size match the 7200 RPM and 32MB specifications.
No, as a Bare Drive only the HDS721075KLA330 unit itself is included; you must supply your own SATA data cable, power connection and 3.5" mounting screws.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?