我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

HPE

HPE 846996-B21 4TB 7200RPM SAS 12Gb/s 3.5" internal hard drive

SKU CH-XGYE-5HSES

A 4 TB SAS 12 Gb/s enterprise hard drive spinning at 7200 RPM with a 7.4 ms average seek time in a hot-swap 3.5-inch form factor

  • InterfaceSAS 12Gb/s
  • Capacity4TB
  • RPM7200 RPM
  • Average Seek Time7.4ms
  • Form Factor3.5"
  • 4 TB capacity stores large data sets
  • 12 Gb/s SAS interface moves data quickly
  • 7200 RPM spindle speeds up read access
  • 5 inch form factor fits standard bays
  • 4 ms average seek time reduces latency

Enterprise storage drive

The HPE 846996-B21 is a 4TB 3.5" SAS hard drive built for servers and storage arrays that require consistent throughput. Its 12Gb/s interface suits high-transaction workloads and enterprise applications where data integrity is critical. The 7200 RPM spindle speed balances capacity and access speed for midline deployments.

Thermals and power in normal use

Average seek time is rated at 7.4ms, reflecting typical mechanical latency during mixed read-write operations. The drive is designed for continuous operation in multi-drive chassis where airflow is managed by the enclosure. Power draw scales with workload but remains within standard 3.5" enterprise envelopes.

Build quality and daily implications

Hot-swap carrier support allows removal or insertion without powering down the host system, reducing maintenance windows. The SAS connector provides dual-port redundancy for path failover in supported controllers. Supplied with 0-hour usage, the unit arrives factory-fresh for immediate deployment in compatible bays.

商品特色

  • 4 TB capacity stores large data sets
  • 12 Gb/s SAS interface moves data quickly
  • 7200 RPM spindle speeds up read access
  • 5 inch form factor fits standard bays
  • 4 ms average seek time reduces latency

商品規格

BrandHP
Part Number846996-B21
InterfaceSAS 12Gb/s
Capacity4TB
RPM7200 RPM
Average Seek Time7.4ms
Form Factor3.5"

商品問答

How do I install this 3.5" SAS 12Gb/s drive into a hot-swap carrier?

Slide the 3.5 inch drive into the HP hot-plug carrier until the SAS 12Gb/s connector seats firmly on the backplane. The step most people miss is securing the carrier latch fully — otherwise the drive can disconnect under vibration.

What maintenance will this 4TB 7200 RPM midline drive need over its service life?

No scheduled maintenance is required for the sealed 4TB 7.2K mechanism. Monitor SMART attributes for reallocated sectors and keep the enclosure cooling adequate; replace the unit if seek time degrades past 7.4ms or error counts rise.

What limit appears first when this 7200 RPM SAS drive runs sustained writes?

The 7200 RPM spindle caps sequential throughput, so sustained write speed hits the mechanical ceiling before the SAS 12Gb/s bus saturates. Expect performance to level off at the drive's native media rate during long transfers.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。