我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Silver 2U rack enclosure with twelve 2.5 inch drive trays loaded and dual controller modules at the rear

HPE

HPE P84179-B25 MSA 2070 2U rack storage 12 x 3.84 TB SSD 2 x 10/25 GbE iSCSI

SKU CH-S54B-018YA MPN P84179-B25

2U rack array with 12 x 3.84 TB SAS SSDs, dual 10/25 GbE iSCSI controllers and 24 drive bays for expansion

  • WorkloadGeneral Purpose Server
  • TypeRack
  • Rack Height2U
  • Storage Controller2 x 10/25 GbE iSCSI 4-port Controllers
  • SSD (Installed)12 x HPE MSA 3.84 TB SAS 12G Read Intensive SFF (2.5in) M2 S
  • Max HDD CapacityUp to 1.8 PB with maximum capacity expansion
  • 12 pre-installed SSDs deliver 46 TB of flash capacity
  • Dual 10/25 GbE iSCSI controllers provide high-speed network connectivity
  • 24 drive bays support expansion up to 1.8 PB
  • 2U rack form factor fits dense data-centre deployments
  • Redundant 580W power supplies maintain uptime during failures

HPE MSA 2070 SFF 2U storage array

The HPE P84179-B25 is a 2U rack-mount SAN system from the MSA 2070 SFF series. It ships with twelve 3.84 TB SAS 12G read-intensive SSDs installed, providing 46 TB of raw capacity. Dual 10/25 GbE iSCSI four-port controllers handle host connectivity and redundancy. The platform supports Windows Server, VMware vSphere, Red Hat Linux and SUSE SLES for general-purpose server workloads.

Suits iSCSI environments needing all-flash

This array fits organisations that want a compact, dual-controller block store with 10 or 25 GbE iSCSI links and room to grow. Buyers who require Fibre Channel connectivity will not find that protocol on this model. Teams without SFP28 networking infrastructure or 2.5-inch drive cabling should evaluate other form factors. The 24-bay chassis allows future expansion with additional SAS SSDs or HDDs.

Dual 10/25 GbE iSCSI four-port controllers

The pair of controllers each expose four SFP28 ports that negotiate at 10 GbE or 25 GbE, defining the host-side bandwidth and protocol. Redundant 580 W power supplies keep both controllers online during a single supply failure. RAID levels 0, 1, 5, 6 and 10 are available across the installed and future drives.

商品特色

  • 12 pre-installed SSDs deliver 46 TB of flash capacity
  • Dual 10/25 GbE iSCSI controllers provide high-speed network connectivity
  • 24 drive bays support expansion up to 1.8 PB
  • 2U rack form factor fits dense data-centre deployments
  • Redundant 580W power supplies maintain uptime during failures

商品規格

BrandHPE
SeriesMSA 2070 SFF
ModelP84179-B25
WorkloadGeneral Purpose Server
TypeRack
Rack Height2U
Storage Controller2 x 10/25 GbE iSCSI 4-port Controllers
SSD (Installed)12 x HPE MSA 3.84 TB SAS 12G Read Intensive SFF (2.5in) M2 SSD
Max HDD CapacityUp to 1.8 PB with maximum capacity expansion
Ethernet ControllerHPE MSA 25Gb SFP28 Short Range 4-pack iSCSI Transceivers
Compatible/Certified OSWindows Server; VMware vSphere; Red Hat Linux; SUSE SLES
Power Characteristics2 x 580W redundant power supplies
出貨重量18.14 kg
包裝尺寸483 × 457 × 127 mm

商品問答

Which host-bus adapters or switches do I need to connect the 10/25 GbE iSCSI controllers?

You need SFP28 transceivers and cables that support 10 or 25 GbE iSCSI; the system includes four HPE MSA 25Gb SFP28 short-range transceivers for direct switch links.

Can I mix the installed 3.84 TB SAS SSDs with older SAS HDDs in the same 24-bay chassis?

Yes, the 24 SFF bays accept both the 12 installed 3.84 TB SAS SSDs and additional SAS HDDs, allowing mixed-media tiers within the same enclosure.

How do I verify the dual controllers are active and the 46 TB pool is healthy after racking the 2U unit?

Log into the MSA 2070 management UI; both controllers should show "Active/Optimal" status and the dashboard will report 46 TB of configured SSD capacity with RAID 0, 1, 5, 6 or 10.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。