我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green PCIe RAID controller card with 8GB cache module and four SlimSAS ports

HPE

HPE SR932i-p Gen11 P47184-B21 8GB RAID controller

SKU CH-MS9Z-65PVY MPN P47184-B21

8GB cache RAID controller with 4x8 SlimSAS delivering 46 GB/s throughput and 3.5M IOPs

  • Type4x8 SlimSAS
  • InterfacePCI Express
  • Transfer RateUp to 46 GB/s of bi-directional throughput and up to 3.5M IO
  • Cache Memory8GB
  • RAID0/1/5/6/10/50/60/1T/10T
  • Up to 46 GB/s throughput accelerates demanding workloads
  • 8 GB cache boosts read and write performance
  • Supports RAID 0, 1, 5, 6, 10, 50, 60, 1T, 10T for flexible data protection
  • 32 PCIe lanes deliver high bandwidth connectivity
  • Delivers up to 3.5M IOPs for low-latency storage access

HPE SR932i-p Gen11 RAID controller

The HPE SR932i-p Gen11 is a PCI Express storage controller built for Gen11 servers. It provides 8GB of cache memory and supports RAID 0/1/5/6/10/50/60/1T/10T across four 8-lane SlimSAS ports. The card targets administrators who need hardware RAID acceleration for direct-attached storage arrays. It is not suited for systems that lack a compatible PCI Express slot or that require software-only RAID management.

Sustained throughput and cache behaviour

The controller delivers up to 46 GB/s of bi-directional throughput and up to 3.5M IOPs under load. The 8GB wide cache absorbs write bursts and keeps read latency low during extended I/O streams. This architecture helps maintain consistent performance when multiple virtual machines or databases share the same drive group. Workloads that exceed the cache capacity or the lane bandwidth will see reduced gains compared with short bursts.

PCI Express lane and connector limits

The card operates across 32 PCI Express lanes using a 4x8 SlimSAS layout. Each connector carries eight lanes, so the host must provide matching slot width and electrical support. Servers limited to fewer lanes or a different connector type cannot utilise the full transfer rate. The interface does not support additional drive channels beyond the four ports defined by the physical layout.

商品特色

  • Up to 46 GB/s throughput accelerates demanding workloads
  • 8 GB cache boosts read and write performance
  • Supports RAID 0, 1, 5, 6, 10, 50, 60, 1T, 10T for flexible data protection
  • 32 PCIe lanes deliver high bandwidth connectivity
  • Delivers up to 3.5M IOPs for low-latency storage access

商品規格

BrandHPE
ModelSR932i-p Gen11
Part NumberP47184-B21
Type4x8 SlimSAS
InterfacePCI Express
Transfer RateUp to 46 GB/s of bi-directional throughput and up to 3.5M IOPs
Cache Memory8GB
RAID0/1/5/6/10/50/60/1T/10T
出貨重量1.36 kg
包裝尺寸254 × 178 × 102 mm

商品問答

How much power does the SR932i-p Gen11 draw when running 24/7?

The controller provides up to 46 GB/s bi-directional throughput and 3.5M IOPs with 8GB cache, operating over a PCI Express x32 lane interface designed for sustained server workloads.

Which cables or drive backplanes are needed to connect drives to the 4x8 SlimSAS ports?

The card uses four 8-lane SlimSAS connectors (4x8) so you need matching SlimSAS cables or a compatible backplane that accepts the same interface.

Will this RAID controller work in a Gen10 server chassis I already own?

The SR932i-p Gen11 is a Gen11 plug-in storage controller with SPDM support and requires a Gen11-era PCI Express slot and firmware stack for full operation.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。