我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Rectangular ATX power supply unit in matte black finish

KHACHIMO

KHACHIMO 3.3V 3A 15W Power Supply ECL15US03-S

SKU CH-DE5B-ZSEWV

Delivers 3.3 V at 3 A for 15 W with 80 PLUS Gold efficiency, zero-RPM fan mode and LLC resonant topology

  • TypeATX
  • Fast wake-from-sleep with Modern Standby support
  • Lower power draw thanks to 80 PLUS Gold efficiency
  • Near-silent operation via Zero RPM fan mode
  • Clean, stable power from Resonant LLC with DC-to-DC
  • 3 V output at 3 A for 15 W delivery

KHACHIMO 3.3V 15W ATX Power Supply

The KHACHIMO ECL15US03-S is a 15W ATX power supply delivering 3.3V at 3A. It targets ultra-low-power system builds, embedded applications or legacy hardware maintenance where minimal wattage and modern standby support are required.

Modern Standby Upgrade

This unit replaces older ATX supplies that lack Modern Standby compatibility and efficient low-load operation. The jump is worthwhile when building or servicing systems that demand fast wake-from-sleep times and 80 PLUS Gold efficiency at very light loads.

15W Capacity and Headroom

The 15W output comfortably handles ultra-low-power platforms, thin clients or legacy boards with modest 3.3V rail demands. It runs out when the system requires higher total wattage, additional voltage rails or sustained loads beyond the 3A limit on the single 3.3V output.

商品特色

  • Fast wake-from-sleep with Modern Standby support
  • Lower power draw thanks to 80 PLUS Gold efficiency
  • Near-silent operation via Zero RPM fan mode
  • Clean, stable power from Resonant LLC with DC-to-DC
  • 3 V output at 3 A for 15 W delivery

商品規格

TypeATX

商品問答

Does this 3.3 V 3 A unit follow the ATX form factor for standard case mounting?

Yes, the specifications list the type as ATX, so it uses the standard mounting hole pattern and overall dimensions for ATX cases.

Which cable should be connected first when installing this supply to enable Modern Standby wake-from-sleep?

Connect the 24-pin ATX main power cable and the 4-pin or 8-pin CPU power cable before turning on the PSU switch; the motherboard then handles Modern Standby signalling.

Is the fan replaceable when the Zero RPM mode eventually wears out the bearing?

The fan is not designed for user replacement; if bearing noise appears after long use the entire power supply would need to be swapped.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。