KHACHIMO
KHACHIMO CUS100MB 28V 2.9A 100W power supply
Delivers 100 W at 28 V and 2.9 A with 80 PLUS Gold efficiency, Modern Standby support, and a zero-RPM fan mode for silent low-load operation
- TypeATX
- Modern Standby support for instant wake and low-load efficiency
- 80 PLUS Gold certified efficiency cuts power use and heat
- Zero RPM fan mode stops the fan at low loads for silent operation
- Resonant LLC topology with DC-to-DC delivers clean power and reduces coil whine
- 100 W output at 28 V 2.9 A powers demanding builds reliably
100 W ATX Power Supply
This KHACHIMO unit delivers 100 W of continuous power through a 28 V output rated at 2.9 A. It is built to the ATX form factor and carries 80 PLUS Gold certification for high efficiency. The design targets system builders who need a compact, efficient supply for low-power configurations.
Suitable for modern standby PCs and silent builds
Modern Standby compatibility enables extremely fast wake-from-sleep times and improved low-load efficiency. Zero RPM fan mode stops the fan entirely at low and medium loads for near-silent operation. Builders who require higher wattage for multi-GPU setups or heavy overclocking should look at higher-capacity units instead.
Verify ATX fit and 28 V rail requirements
Confirm that your chassis accepts a standard ATX power supply and that your components are designed for a 28 V primary rail. Check that the 100 W total output covers the combined draw of your CPU, graphics card and peripherals. Ensure the included connectors match your motherboard and device needs before ordering.
商品特色
- Modern Standby support for instant wake and low-load efficiency
- 80 PLUS Gold certified efficiency cuts power use and heat
- Zero RPM fan mode stops the fan at low loads for silent operation
- Resonant LLC topology with DC-to-DC delivers clean power and reduces coil whine
- 100 W output at 28 V 2.9 A powers demanding builds reliably
商品規格
| Type | ATX |
|---|
商品問答
What motherboard power connector does the CUS100MB-28A need to turn on?
The unit is an ATX power supply, so it provides a 24-pin main connector and a CPU power connector that plug directly into a standard motherboard.
Will my older motherboard work with the Modern Standby features of this 100W unit?
Modern Standby requires platform support; the PSU will still deliver 28 V at 2.9 A on older boards, but the fast wake and low-load efficiency benefits only activate on compatible systems.
How can I confirm the 80 PLUS Gold efficiency is active after I install the supply?
At typical loads the fan stays off in Zero RPM mode, and the system wakes from sleep almost instantly, showing the high-efficiency LLC topology and DC-to-DC conversion are operating.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。



