我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

KHACHIMO

KHACHIMO PMT 12V 29A 24V 14.6A 350W ATX power supply

SKU CH-9K4T-CG702

An ATX power supply delivering 350 W with 12 V at 29 A and 24 V at 14.6 A, 80 PLUS Gold efficiency, zero-RPM fan mode and Modern Standby support

  • TypeATX
  • Fast wake-from-sleep with Modern Standby support
  • 80 PLUS Gold efficiency cuts power draw and heat
  • Fan stops completely at low load for silent running
  • LLC resonant topology plus DC-to-DC gives clean, stable rails
  • 350 W ATX unit delivers 12 V at 29 A and 24 V at 14.6 A

350 W ATX power supply for modern PCs

This 350 W ATX unit delivers 12 V at 29 A and 24 V at 14.6 A to support mainstream desktop builds. It targets system integrators and DIY builders who need reliable power with 80 PLUS Gold efficiency and Modern Standby compatibility for fast wake-from-sleep behaviour.

Capacity and headroom on the 12 V rail

The 12 V rail provides 29 A of continuous current, which is the primary power source for the CPU and graphics card. This headroom suits mid-range configurations but will run out when paired with high-end GPUs or heavily overclocked processors that demand significantly more 12 V amperage.

Upgrade path from older or lower-rated units

Replacing a lower-wattage or non-Gold supply eliminates coil whine through resonant LLC topology with DC-to-DC conversion and adds Zero RPM fan mode for silent low-load operation. The jump is worth it when the existing unit lacks Modern Standby support or cannot sustain clean power delivery under variable loads.

商品特色

  • Fast wake-from-sleep with Modern Standby support
  • 80 PLUS Gold efficiency cuts power draw and heat
  • Fan stops completely at low load for silent running
  • LLC resonant topology plus DC-to-DC gives clean, stable rails
  • 350 W ATX unit delivers 12 V at 29 A and 24 V at 14.6 A

商品規格

TypeATX

商品問答

Will this 350W ATX unit run a legacy motherboard that only has a 20-pin main connector?

The PSU follows the ATX form factor and provides a 24-pin main connector; a 20-pin motherboard will accept the first 20 pins of that connector.

How can I confirm the 80 PLUS Gold efficiency is active after installation?

Under typical loads the fan stays off thanks to Zero RPM mode, and the system wakes from Modern Standby almost instantly.

Which cables come attached and what must I source separately?

All cables are fixed to the unit — 24-pin ATX, 4+4-pin CPU, PCIe 6+2-pin and peripheral leads — so nothing extra is required.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。