我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green 240-pin DDR3 DIMM with black chips, no heat spreader

Kingston Technology Corp.

Kingston Technology Corp. KVR16N11/8 8GB DDR3 1600 desktop RAM

SKU CH-PG9Z-GCYBZ MPN KVR16N11/8

An 8 GB DDR3 desktop module running at 1600 MHz with CL11 timing and standard 1.5 V operation

  • Capacity8GB
  • Type240-Pin PC RAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.50V

Capacity 8GB

  • 8GB capacity lets you run more applications at once
  • DDR3 1600 speed moves data at 1600Mb/sec per pin
  • CL11 timing with 11-11-11 cycle reduces access delay
  • JEDEC 1.5V standard keeps power draw low and stable
  • 240-pin unbuffered DIMM fits standard desktop memory slots

8GB DDR3 1600 module for desktop upgrades

This Kingston ValueRAM stick delivers 8GB of DDR3 memory at 1600 MT/s with CL11 timings. It is an unbuffered, non-ECC DIMM built to JEDEC 1.5V specifications for standard desktop systems.

Check motherboard DDR3 slot count

Verify that your board accepts 240-pin DDR3 DIMMs and supports 1600 MT/s operation at 1.5V. Ensure enough free slots exist for the desired total capacity and that the BIOS can run JEDEC-standard timings of 11-11-11.

Runs at standard voltage with no heat spreader

The module operates at 1.5V within the 1.425V to 1.575V JEDEC range, drawing minimal power in normal use. Without a heat spreader it relies on case airflow; PCB height is 18.75mm so it fits most standard DIMM slots.

商品特色

  • 8GB capacity lets you run more applications at once
  • DDR3 1600 speed moves data at 1600Mb/sec per pin
  • CL11 timing with 11-11-11 cycle reduces access delay
  • JEDEC 1.5V standard keeps power draw low and stable
  • 240-pin unbuffered DIMM fits standard desktop memory slots

商品規格

BrandKingston
SeriesValueRAM
ModelKVR16N11/8
Capacity8GB
Type240-Pin PC RAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ColorBlack
Heat SpreaderNo
FeaturesJEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
VDDQ = 1.5V (1.425V ~ 1.575V)
800MHz fCK for 1600Mb/sec/pin
8 independent internal banks
Programmable CAS latency: 11, 10, 9, 8, 7, 6
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
8-bit pre-fetch
Burst Length: 8 (interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write (either on the fly using A12 or MRS)
Bi-directional Differential Data Strobe
Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)
On Die Term
出貨重量0.03 kg
包裝尺寸147 × 46 × 9 mm

其他版本

同系列還有 3 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will this 8 GB DDR3 1600 module fit a standard desktop DIMM slot?

Yes, it uses the 240-pin DDR3 form factor that matches ordinary desktop memory slots.

Does the module require a motherboard that can supply 1.5 V?

It operates at the JEDEC standard 1.5 V with a supported range of 1.425 V to 1.575 V.

Can I add this stick alongside existing CL9 memory?

The module runs at CL11 by default but supports programmable CAS latencies down to CL6, so the system will typically negotiate a common speed and timing.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。