我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Lenovo

Lenovo 2GB DDR3 1066MHz PC3-8500 CL7 1.50V 204-pin SODIMM laptop RAM

SKU CH-YNYB-FXSV4

2 GB DDR3 SODIMM kit running at 1066 MHz with CL7 latency for compatible ThinkPad notebooks

  • Capacity2GB (2 x 1GB)
  • TypeRAM Module
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • 2 GB capacity lets you run everyday notebook tasks
  • DDR3 1066 MHz speed matches PC3-8500 system requirements
  • CL7 latency delivers responsive memory access
  • 50 V operation keeps power draw low
  • 204-pin SODIMM form factor fits compatible ThinkPad models

Capacity and fit

This Lenovo kit supplies 2 GB of DDR3 laptop memory as two 1 GB SODIMM modules running at 1066 MHz with CL7 latency and 1.50 V operation. The 204-pin form factor matches the slots used in the listed ThinkPad models.

Suitable systems and limits

The memory is validated for ThinkPad R400, R500, T400, T500, W500, W700, X200 and X200S notebooks. Laptops that require a different pin count, voltage or DDR generation will not accept these modules. Buyers needing more than 2 GB total capacity should look elsewhere.

Deciding specification

The critical match is DDR3 1066 (PC3-8500) at 1.50 V with CL7 timing in a 204-pin SODIMM package. If your service manual specifies that exact standard the kit will work; if it calls for any other speed, voltage or form factor it will not.

商品特色

  • 2 GB capacity lets you run everyday notebook tasks
  • DDR3 1066 MHz speed matches PC3-8500 system requirements
  • CL7 latency delivers responsive memory access
  • 50 V operation keeps power draw low
  • 204-pin SODIMM form factor fits compatible ThinkPad models

商品規格

BrandLenovo
Capacity2GB (2 x 1GB)
TypeRAM Module
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V

商品問答

Does this kit use the standard 204-pin SODIMM slot found in ThinkPad R400, T400, W500 and X200 models?

Yes, each module is a 204-pin DDR3 SODIMM designed for the notebook platforms listed in the compatibility table.

What is the correct way to seat the modules so they lock into the 204-pin socket?

Align the notch on the module with the key in the slot, press the stick in firmly until the side clips snap into the notches on the PCB edges.

Will the 1.50 V DDR3 chips need any firmware update or voltage adjustment after installation?

No, the modules operate at the standard 1.50 V JEDEC voltage and require no BIOS changes or firmware updates.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。