Lenovo
Lenovo 4ZC7A15142 32GB DDR4 2666MHz ECC Reg DIMM server RAM
32GB DDR4 2666MHz ECC registered DIMM for Lenovo ThinkSystem ST250, ST258, 7Y45, 7Y46, 7Y47 servers
- Capacity32GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL1.5
- 32 GB capacity supports demanding server workloads
- DDR4 2666 MHz speed delivers 21300 MT/s data rate
- ECC registered design protects data integrity
- 20 V operation reduces power consumption
- Compatible with ThinkSystem ST250, ST258, 7Y45, 7Y46, 7Y47
Lenovo 32GB DDR4 2666MHz ECC DIMM
This Lenovo TruDDR4 module delivers 32GB of registered ECC memory at 2666MHz for ThinkSystem servers. The 288-pin DIMM operates at 1.20V with CL1.5 latency and PC4-21300 bandwidth. It is built for environments that require error correction and registered signal processing.
Compatibility limited to listed ThinkSystem models
This module is validated for ThinkSystem ST250, ST258, 7Y45, 7Y46 and 7Y47 servers only. Builders using other platforms, desktop boards or workstations without registered ECC support should look elsewhere. Systems needing unbuffered non-ECC memory or different pin counts cannot use this part.
Registered ECC with CL1.5 latency
The registered ECC design with CL1.5 CAS latency is the specification that determines fit. This combination provides error detection and signal buffering required by the supported ThinkSystem platforms. Verify your server requires registered ECC DDR4 at this exact latency before purchase.
商品特色
- 32 GB capacity supports demanding server workloads
- DDR4 2666 MHz speed delivers 21300 MT/s data rate
- ECC registered design protects data integrity
- 20 V operation reduces power consumption
- Compatible with ThinkSystem ST250, ST258, 7Y45, 7Y46, 7Y47
商品規格
| Capacity | 32GB |
|---|---|
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL1.5 |
| 出貨重量 | 0.45 kg |
| 包裝尺寸 | 163 × 81 × 25 mm |
商品問答
Will the 288-pin DDR4 DIMM fit my ThinkSystem ST250 server?
Yes, the 288-pin DDR4 DIMM is listed as compatible with the ThinkSystem ST250, ST258 and 7Y45, 7Y46, 7Y47 servers.
Do I need to configure anything in BIOS after seating the ECC registered module?
The module runs at 1.20 V with CL1.5 latency at 2666 MHz; most ThinkSystem platforms detect these settings automatically, so no manual BIOS change is usually required.
How do I know when a 32 GB TruDDR4 stick should be replaced?
Replace the module if the server logs recurring correctable ECC errors or if memory diagnostics report uncorrectable faults on that specific DIMM.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。



