我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

LORDWORLD

LORDWORLD Nano Base Board (B) development board for CM5 Lite/eMMC

SKU CH-CCCJ-XR8JD

Compact carrier for Raspberry Pi Compute Module 5 with USB 3.2 Gen1, mini HDMI 4K output, and dual MIPI 4-lane connectors

  • Compact footprint matches CM5 for tight integration
  • USB 3.2 Gen1 Type A adds high-speed peripheral support
  • Mini HDMI port enables 4K display output
  • Dual MIPI 4-lane connectors allow two camera or display links
  • Ready for CM5 Lite or eMMC evaluation and deployment

Compact Carrier for CM5 Lite and eMMC

This LORDWORLD Nano Base Board (B) matches the footprint of the Raspberry Pi Compute Module 5 and carries a single USB 3.2 Gen1 Type A port, one Mini HDMI output and two MIPI 4-lane connectors on 22-pin 0.5 mm FPC sockets. It is built for engineers evaluating the CM5 or embedding it directly into space-constrained end products. The board adds no extra bulk beyond the module itself.

Mini HDMI 4K and USB 3.2 Gen1 limits

The Mini HDMI port can drive a 4K display but the connector is physically smaller than standard HDMI, so a compatible cable or adapter is required. The single USB 3.2 Gen1 Type A port tops out at 5 Gbps shared bandwidth and supplies only the current the CM5 can negotiate; high-draw peripherals will need external power. Both MIPI lanes use the same 22-pin 0.5 mm pitch, limiting cable length and panel selection to that specific FPC format.

Two MIPI 4-lane FPC sockets decide fit

Dual 22-pin 0.5 mm MIPI connectors are the defining I/O for camera or display integration; if your sensors use a different pin count, pitch or lane count this board cannot connect them without a custom adapter. No other video or high-speed interfaces are broken out, so the MIPI sockets alone determine whether the Nano Base Board (B) suits your peripheral set.

商品特色

  • Compact footprint matches CM5 for tight integration
  • USB 3.2 Gen1 Type A adds high-speed peripheral support
  • Mini HDMI port enables 4K display output
  • Dual MIPI 4-lane connectors allow two camera or display links
  • Ready for CM5 Lite or eMMC evaluation and deployment

商品規格

BrandLORDWORLD

商品問答

Which Compute Module 5 variant fits this base board?

The board accepts both CM5 Lite and CM5 eMMC modules, so you choose based on whether you need on-module storage or prefer an external boot device.

What does the 4K output over mini HDMI actually deliver?

The mini HDMI port drives a 4K display directly from the CM5's video pipeline, giving full desktop resolution without extra converters.

What bandwidth does the USB 3.2 Gen1 Type-A port provide?

The single USB 3.2 Gen1 Type-A port runs at 5 Gbit/s, capping peripheral throughput at that rate.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。