SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501664BTC
現貨
Manw
Manw HLK-20M12 12V 20W AC-DC Power Supply
Compact 12 V 20 W AC-DC module accepts 90–265 V input with 3000 Vac isolation and built-in short-circuit protection
- Ultra-thin module fits tight enclosures
- Universal 90 ~ 265Vac input suits global mains
- Low ripple and noise delivers clean 12V output
- circuit and over-current protection with self-recovery
- 3000Vac isolation withstands high-voltage transients
Compact AC-DC Module for Embedded Projects
The Manw HLK-20M12 converts mains voltage into a regulated 12 V rail rated at 20 W. Its ultra-thin profile suits tight enclosures in home-automation nodes, sensor hubs or custom IoT gateways where board space is at a premium.
Steady Output Under Continuous Load
Universal input accepts 90 V to 265 Vac so the module rides through brown-outs and regional voltage differences without shutting down. Low ripple and noise keep sensitive analog front-ends stable, while built-in short-circuit and over-current protection auto-recovers to maintain uptime in unattended installations.
3000 Vac Isolation Barrier Decides Fit
Input-to-output withstand voltage of 3000 Vac provides the safety margin required for mains-connected designs. If your schematic demands a lower isolation rating or a different output voltage, this module will not meet the specification.
商品特色
- Ultra-thin module fits tight enclosures
- Universal 90 ~ 265Vac input suits global mains
- Low ripple and noise delivers clean 12V output
- circuit and over-current protection with self-recovery
- 3000Vac isolation withstands high-voltage transients
商品規格
| Brand | Manw |
|---|
商品問答
How much heat does the HLK-20M12 produce when running continuously at 20 W?
The module uses a compact, ultra-thin design with no fan, so heat is dissipated through the case. At full 20 W load the surface becomes warm but stays within the limits set by its 3000 Vac isolation rating.
What mains wiring and DC-side connections are needed to install this supply?
Connect the AC input pins to a 90–265 Vac source (220 V nominal) and the DC output pins to your 12 V load; no extra converters or cables are included in the package.
Will the 12 V output run legacy 12 V gear that draws up to 20 W without voltage sag?
The unit delivers a regulated 12 V with low ripple and built-in over-current protection that self-recovers, so older 12 V devices drawing up to the rated 20 W will operate steadily.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
