我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green PCB riser card with right-angle gold-edge connector and protective cover

Manw

Manw PCI-Express 3.0/4.0 16x 90 Degree Riser Card for 1U/2U Server Case (PCI-E 3.0 for 1U)

SKU CH-58YP-SZCCE

A 90-degree PCI-Express 3.0/4.0 16x riser card lets you install a full-sized add-in card inside a 1U or 2U server chassis

  • Fits full-sized PCIe cards in 1U server cases
  • Right-angle 90-degree design for low-profile chassis
  • Supports PCIe 3.0 and 4.0 at 16x bandwidth
  • Gold-finger cover protects contacts from dust
  • Moves expansion card away from motherboard for airflow

90-Degree Riser for 1U and 2U Servers

This PCI-Express riser card lets you install a full-sized expansion card inside a 1U or 2U server chassis. The 90-degree right-angle design routes the card parallel to the motherboard, removing the need for low-profile alternatives. It supports both 3.0 and 4.0 signalling at 16x width. The connector is soldered on the component side so the installed card faces the motherboard.

Passive Design With Gold-Finger Protection

The board has no active cooling, so it adds no fan noise and draws no extra power beyond the slot itself. A gold-finger protection cover shields the edge connector from oxidation and dust during handling and operation. Keeping the add-in card away from the motherboard improves airflow around both components in dense enclosures.

Cost Saving on Expansion Cards

By enabling standard full-height cards in slim servers, the riser avoids the expense and limited selection of specialised low-profile models. The dustproof design helps maintain reliable contact over time. No software or drivers are bundled; the adapter is purely a physical interconnect.

商品特色

  • Fits full-sized PCIe cards in 1U server cases
  • Right-angle 90-degree design for low-profile chassis
  • Supports PCIe 3.0 and 4.0 at 16x bandwidth
  • Gold-finger cover protects contacts from dust
  • Moves expansion card away from motherboard for airflow

商品規格

BrandManw

商品問答

How do I install this 90 degree riser card in a 1U server case?

Insert the riser into the motherboard PCIe x16 slot with the connector on the component side, then mount your full-size add-in card horizontally so it faces down toward the motherboard.

What maintenance will the gold finger contacts need over time?

The gold finger protection cover and dustproof design limit oxidation; occasional inspection and gentle contact cleaning with isopropyl alcohol will maintain reliable conductivity.

What bandwidth limit appears first when running a PCIe 4.0 card continuously through this riser?

The riser operates at PCIe 3.0 speeds in a 1U case, so the 3.0 x16 ceiling becomes the bottleneck before any thermal or signal degradation occurs.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。