我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green development boards with pin headers and USB-C ports

MCDODO

MCDODO STM32F411CEU6 Development Board 2Pcs 100Mhz 128KB RAM 512KB ROM

SKU CH-WNNQ-B1RBF

A two-pack of STM32F411CEU6 development boards with 100 MHz Cortex-M4 cores, 512 KB ROM, 128 KB RAM and 2.54 mm I/O headers for embedded projects

  • TypeSingle Board Computers
  • ARM Cortex-M4 core runs at 100 MHz for fast processing
  • 512 KB flash and 128 KB RAM give ample program space
  • USB-C power input with 3.3 V LDO prevents backflow
  • 20-pin 2.54 mm headers plus 4-pin SWD simplify debugging
  • Two boards included so you can start multi-node projects

Purpose-built learning kit

This pack supplies two STM32F411CEU6 development boards aimed at students and engineers who want hands-on experience with an ARM Cortex-M4 core. Each board delivers a 100 MHz clock, 128 KB of RAM and 512 KB of flash for embedded firmware projects. The set is not suited for builders who need more storage or higher pin-count variants.

Thermals and power behaviour

The boards operate from a 3.3 V to 5 V input with an on-board 3.3 V LDO rated at 100 mA maximum output. A USB-C connector includes a diode to prevent power backflow during development. Typical current draw stays well within the regulator limit, so no active cooling is required.

Connectors and daily workflow

Each unit provides a 20-pin 2.54 mm I/O header, a 4-pin 2.54 mm SW debug header and tactile buttons for KEY (PA0), NRST and BOOT0. High-speed and 32.768 kHz crystal oscillators give reliable timing for USART, I2C, SPI and USBFS peripherals. The pin spacing suits standard breadboards and perfboard prototyping.

商品特色

  • ARM Cortex-M4 core runs at 100 MHz for fast processing
  • 512 KB flash and 128 KB RAM give ample program space
  • USB-C power input with 3.3 V LDO prevents backflow
  • 20-pin 2.54 mm headers plus 4-pin SWD simplify debugging
  • Two boards included so you can start multi-node projects

商品規格

TypeSingle Board Computers

商品問答

How do I connect the 20-pin 2.54 mm I/O headers and the 4-pin SW debug header, and which step is often missed?

Solder the headers to the board, then wire the SW debug pins to a programmer; the step often missed is setting the BOOT0 button to enter programming mode before flashing.

What maintenance will the 3.3V LDO and the USB-C power diode need over time?

The LDO supplies up to 100 mA; keep the load within that limit and ensure adequate airflow so the regulator does not overheat. The USB-C diode prevents back-flow and needs no routine service unless physical damage occurs.

Which limit appears first when the board runs continuously at 100 MHz?

The 3.3V LDO’s 100 mA maximum output current is the first constraint; sustained high-speed operation with peripheral loads can reach that limit and cause voltage drop or thermal shutdown.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。