BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
MSI
Supports fourth and fifth generation Intel Core processors with DDR3 memory up to 32GB and 7.1 channel audio
The MSI Z97 GAMING 5 is an ATX motherboard built around the Intel Z97 chipset for LGA 1150 processors. It supports fourth and fifth generation Intel Core, Pentium and Celeron CPUs. Four DDR3 slots accept up to 32 GB of memory at speeds from 1066 MHz to 3200 MHz when overclocked. The board provides three PCIe 3.0 x16 slots and four PCIe 2.0 x1 slots for expansion cards.
This board suits builders staying on the LGA 1150 platform who want multi-GPU flexibility, 7.1 channel audio from the Realtek ALC1150 codec and a Killer E2205 Ethernet controller for wired networking. Six USB 3.0 ports and eight USB 2.0 ports cover most peripheral needs. Users who need a newer socket, DDR3 memory is the only type supported, or integrated Wi-Fi should look at other platforms.
The single specification that decides fit is the 32 GB ceiling on DDR3 memory across four slots. If your workload requires more RAM than this, the Z97 GAMING 5 cannot accommodate it and a different chipset or socket generation is required.
| Brand | MSI |
|---|---|
| Series | MSI Z97 GAMING 5 |
| Model | MSI Z97 GAMING 5 |
| CPU Socket Type | LGA 1150 |
| CPU Type | Fourth and fifth generation Intel Core ™ Processors, and Intel Pentium and Celeron processors supporting Socket 1150 architecture |
| Chipset | Intel Z97 |
| Memory Standard | Support DDR3 1066/1333/1600/1866/2000/2133/2200/2400/2600/2666/2800/3000/3100/3200/3100/3200 (OC) MHz memory |
| Maximum Memory Supported | 32GB |
| PCI Slots | 3 PCIe 3.0 x16 slots (supports x16, x8/x8, x8/x4/x4 operating modes) 4 PCIe 2.0 x1 slots |
| SATA RAID | 1XM.2 interface, 6xSATA III interface |
| Audio Chipset | Realtek ALC1150 Chip - 7.1 channel high fax sound |
| LAN Chipset | 1 Killer E2205 Speed Ethernet Controller * |
| Onboard USB | - 6 USB 3.0 ports (4 on the backplane, 2 supported through built-in USB 3.0 interfaces) - 8 USB 2.0 ports, 4 on the backplane, 4 supported through built-in USB 2.0 interfaces) |
The board follows the standard ATX form factor, so it fits any ATX case. Keep the CPU cooler within the socket keep-out zone to avoid fouling the four DDR3 slots or the top PCIe 3.0 x16 slot.
Fit the supplied I/O shield before seating the board, connect the 24-pin and 8-pin EPS power cables, install the included CMOS battery, and attach the front-panel headers using the silkscreen labels — the USB 3.0 header is keyed and often forced the wrong way.
The onboard CMOS battery is the only user-replaceable component; swap it when the system loses BIOS settings on cold boot. The six SATA III ports and four DDR3 slots are fixed, so drive or memory upgrades use those existing interfaces.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?