我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 1.1TB 12x96GB DDR5-6400 CL52 2Rx4 ECC RDIMM Supermicro H14SSL-NT

SKU CH-Z9VF-54TQ6

1.1 TB server memory kit with twelve 96 GB DDR5-6400 CL52 2Rx4 registered ECC RDIMMs validated for Supermicro H14SSL-NT

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 1TB capacity from twelve 96GB modules fills every slot on the H14SSL-NT
  • DDR5-6400 CL52 at 1.10V matches the board's exact timing and voltage requirements
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 2Rx4 dual-rank organisation enables full 1.1TB density across all 12 DIMMs
  • 288-pin RDIMM form factor is the only module type the Supermicro H14SSL-NT accepts

1.1 TB DDR5-6400 ECC RDIMM kit for Supermicro

This kit supplies twelve 96 GB DDR5 registered DIMMs totalling 1.1 TB of ECC memory. It targets administrators upgrading the Supermicro H14SSL-NT motherboard where full population and registered operation are required. Each module runs at DDR5-6400 with CL52 latency at 1.10 V. The 2Rx4 rank configuration matches the board's memory controller expectations.

DDR5-6400 registered ECC limits

The 288-pin RDIMM form factor only fits motherboards wired for registered DDR5; it will not seat in UDIMM or SODIMM slots. Registered buffering allows all twelve slots to operate at rated speed, while ECC corrects single-bit errors without halting the system. CL52 timing and 1.10 V are fixed by the JEDEC DDR5-6400 specification; the modules do not support overclocking profiles or lower latencies.

Verify motherboard population rules before ordering

The Supermicro H14SSL-NT manual defines supported capacities per channel and the exact DIMM installation sequence for twelve modules. Confirm the board revision and BIOS version accept 96 GB 2Rx4 RDIMMs at full population. Ensure the chassis provides 288-pin DDR5 RDIMM clearance and that the power budget accommodates twelve registered modules.

商品特色

  • 1TB capacity from twelve 96GB modules fills every slot on the H14SSL-NT
  • DDR5-6400 CL52 at 1.10V matches the board's exact timing and voltage requirements
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 2Rx4 dual-rank organisation enables full 1.1TB density across all 12 DIMMs
  • 288-pin RDIMM form factor is the only module type the Supermicro H14SSL-NT accepts

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

商品問答

Should I choose the 1.1TB kit with 12 modules of 96GB each or a different capacity for my Supermicro H14SSL-NT?

The 1.1TB kit contains 12 modules of 96GB each, matching the DDR5-6400 CL52 2Rx4 registered ECC specification your board expects for full population at rated speed.

What does the DDR5-6400 speed rating actually deliver once the modules are installed in the server?

The memory runs at 6400 MT/s with CL52 latency at 1.10V, providing the exact bandwidth and timing the memory controller is validated for when all 12 slots are populated.

How does the 288-pin RDIMM interface and registered ECC design affect real-world operation?

The 288-pin registered RDIMM format buffers address and command signals, allowing stable operation at full 1.1TB capacity, while on-die ECC corrects single-bit errors to prevent data corruption.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。