SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501144BTC
現貨
NEMIX RAM
NEMIX RAM 128GB (16x8GB) DDR4 3200 CL22 ECC RDIMM THINKMATE memory upgrade
A 128GB registered ECC DDR4 kit running at 3200MHz with CL22 timing, built for ThinkMate GPU-optimised servers
- Capacity128GB (16 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 128 GB DDR4 3200 ECC registered capacity for dense server workloads
- CL22 latency at 1.2 V balances speed with power efficiency
- 16 x 8 GB 1Rx8 modules populate all slots for maximum density
- Samsung Micron Hynix chips validated under load for mission-critical reliability
- 288-pin RDIMM form factor fits THINKMATE GPU-optimised servers
128GB DDR4 ECC RDIMM kit for Thinkmate GPU servers
This 128GB kit contains 16 modules of 8GB each, running at DDR4 3200 with CL22 latency. The modules are registered ECC RDIMMs operating at 1.20V, built with major OEM chips from Samsung, Micron or Hynix. They are validated for Thinkmate GPX-PS4-12A1-2GPU and GPX-PS4-12A1-4GPU GPU-optimised servers.
Upgrade from lower-capacity or non-ECC DDR4 RDIMMs
Replacing smaller registered ECC kits or non-ECC memory with this 128GB configuration adds capacity for multi-GPU workloads while keeping error correction and signal integrity. The jump is worth it when the server platform requires registered DIMMs and the application benefits from 128GB across all 16 slots.
Suited for IT teams scaling Thinkmate GPU servers
Buyers who need a fully populated 16-module kit with matching 1Rx8 ranks for these specific Thinkmate models will find this kit compatible. Builders using consumer motherboards, platforms that require unbuffered UDIMMs, or systems limited to fewer than 16 slots should look elsewhere.
商品特色
- 128 GB DDR4 3200 ECC registered capacity for dense server workloads
- CL22 latency at 1.2 V balances speed with power efficiency
- 16 x 8 GB 1Rx8 modules populate all slots for maximum density
- Samsung Micron Hynix chips validated under load for mission-critical reliability
- 288-pin RDIMM form factor fits THINKMATE GPU-optimised servers
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-818K16 |
| Capacity | 128GB (16 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (16X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT |
商品問答
Will the 128GB kit with 16 modules of 8GB each fit the 288-pin RDIMM slots in my ThinkMate server?
Yes, every module is a 288-pin DDR4 RDIMM, the standard form factor for the supported ThinkMate GPU-optimised servers.
What is the correct way to populate all 16 slots, and which step is most often missed?
Follow the server manual’s population sequence for 1Rx8 registered DIMMs; the step most often missed is installing modules in the exact slot order the firmware expects.
How can I tell when one of the 16 ECC RDIMMs needs to be replaced?
The server’s management console will log correctable ECC errors; a rising count on a specific module signals it should be swapped out.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
