BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
NEMIX RAM
A 128GB kit of four 32GB DDR4 2666MHz CL19 UDIMMs built for Dell Precision 3930 Rack workstations
This 128GB kit contains four 32GB DDR4 2666MHz UDIMMs built for the Dell Precision 3930 Rack workstation. The modules run at 1.20V with CL19 latency and use a 2Rx8 rank structure. They are non-ECC and unbuffered, matching the factory memory specification for this platform.
The DDR4 2666 interface caps bandwidth at the PC4-21300 level, so workloads that scale with memory throughput will hit this ceiling. Four populated slots leave no free DIMM sockets for later expansion without removing existing modules. The 2Rx8 organisation is fixed and cannot be changed to a single-rank configuration.
Installation follows the standard UDIMM procedure: align the 288-pin edge connector with the motherboard slot and press until the retention clips engage. No heat spreader is fitted, so clearance is minimal and cable routing is simple. The usual error is mixing these non-ECC modules with registered or ECC DIMMs, which prevents the system from posting.
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR4 2666MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD21300-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Dell |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (4X32GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 288-PIN Non-ECC Unbuffered UDIMM KIT |
This kit provides 128GB total capacity across four 32GB modules, filling four DDR4 slots for the maximum supported density in the Precision 3930 Rack.
The DDR4 2666 (PC4-21300) rating sets the maximum data rate the memory controller will run at; in the Precision 3930 Rack it operates at 2666MHz with CL19 latency at 1.2V.
Yes, the 288-pin DDR4 UDIMM form factor matches the Precision 3930 Rack's unbuffered non-ECC DDR4 slots, and the 2Rx8 organisation is supported by the platform.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?