BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
NEMIX RAM
A 128GB DDR5 5600 kit with four 32GB modules at CL46 and 1.1V for the ASRock Rack W880D4U-2L2T
This 128GB kit is built specifically for the ASRock Rack W880D4U-2L2T motherboard. It contains four 32GB DDR5 UDIMM modules that install without registration or ECC overhead. System integrators upgrading that platform receive a matched set validated for the board's memory topology. Buyers needing registered DIMMs or error-correcting code support should select a different product line.
Each module operates at the standard DDR5 voltage of 1.10V and carries no heat spreader, relying on chassis airflow for cooling. The CL46 latency at 5600 MT/s keeps the DRAM within JEDEC power envelopes during sustained workloads. Audible noise is limited to the system fans; the memory itself adds no active cooling. Installers should verify that case ventilation meets the motherboard vendor's guidelines.
The package delivers four 288-pin UDIMMs in a single kit, eliminating the need to source individual sticks. Non-ECC unbuffered architecture means the modules work with the W880D4U-2L2T's consumer-style memory controller without server-class buffering. No software utilities or firmware updates are bundled; configuration is handled entirely through the system BIOS. Builders using other motherboards must confirm DDR5 UDIMM support before purchase.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (4 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Power down, open the chassis, align each 288-pin module with the slot key, press firmly until both latches click, then verify in BIOS that all 128 GB run at 5600 MT/s CL46 1.1 V; the step most often missed is checking the BIOS memory map to confirm every module is detected at the rated speed.
The modules have no heat spreader, so keep the server interior clean and maintain strong airflow over the bare PCBs; no scheduled component replacement is expected unless a module fails, in which case the individual 32 GB stick can be swapped.
The primary limit is the CL46 latency at 5600 MT/s combined with the 1.1 V operating voltage; under continuous heavy traffic the memory controller will hit timing and voltage constraints before thermal throttling becomes an issue.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?