BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00278456BTC
現貨
NEMIX RAM
NEMIX RAM 128GB (8x16GB) DDR4 3200 ECC RDIMM CL22 Gigabyte WRX80-SU8-IPMI
Eight 16 GB DDR4 3200 ECC registered DIMMs totalling 128 GB at 1.2 V for the Gigabyte WRX80-SU8-IPMI
- Capacity128GB (8 x 16GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 128 GB total capacity with eight 16 GB modules
- DDR4 3200 speed rated at PC4-25600 for server workloads
- ECC registered RDIMM design detects and corrects memory errors
- 2 V operation at CL22 latency keeps power draw low
- Validated for Gigabyte WRX80-SU8-IPMI motherboard compatibility
128GB DDR4 ECC RDIMM Kit
This 128GB kit contains eight 16GB DDR4 3200 registered DIMMs built for the Gigabyte WRX80-SU8-IPMI motherboard. ECC and registered operation protect data integrity in server and workstation workloads. The modules run at 1.20V with CL22 latency.
Thermals and power at 1.20V
Each DIMM draws 1.20V without a heat spreader, relying on chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller during sustained use. Power draw stays consistent with standard DDR4 RDIMM specifications.
Build and connector details
The 288-pin RDIMM form factor fits only DDR4 RDIMM slots; it will not work in UDIMM or SO-DIMM sockets. Eight modules fill all channels on the target board for maximum bandwidth. No heat spreader means low-profile clearance for tight server chassis.
商品特色
- 128 GB total capacity with eight 16 GB modules
- DDR4 3200 speed rated at PC4-25600 for server workloads
- ECC registered RDIMM design detects and corrects memory errors
- 2 V operation at CL22 latency keeps power draw low
- Validated for Gigabyte WRX80-SU8-IPMI motherboard compatibility
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | Gigabyte Server Motherboard Compatible Series Memory |
| Model | Gigabyte DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-624K8 |
| Capacity | 128GB (8 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | GIGABYTE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (8X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT |
商品問答
How do I install the eight 288-pin DDR4 RDIMM modules on the Gigabyte WRX80-SU8-IPMI, and which step is often missed?
Power off the server, open the chassis, and insert each 16 GB module into the eight DIMM slots following the motherboard's channel-population diagram; the step most people miss is seating every module until both retention clips click, otherwise the system will not recognise the full 128 GB kit.
What maintenance or replacement will this registered ECC memory need over its service life?
The modules have no heat spreaders and run at 1.20 V, so the only recurring task is keeping the server's airflow paths clean; if a module ever fails the ECC scrub will flag it and the individual 16 GB stick can be swapped without replacing the whole kit.
What limit appears first when the kit runs at DDR4 3200 CL22 under sustained load?
The registered 2Rx8 organisation and CL22 latency set the throughput ceiling; under continuous heavy traffic the memory controller hits its maximum sustainable bandwidth before temperature or voltage (1.20 V) become bottlenecks.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
