BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00278705BTC
現貨
NEMIX RAM
NEMIX RAM 128GB 8x16GB DDR5 4800 CL40 ECC RDIMM SuperMicro 211SE 31AS X31SEED-SF memory upgrade
128 GB registered DDR5 kit with eight 16 GB ECC modules at 4800 MT/s CL40 for SuperMicro 211SE and X31SEED-SF servers
- Capacity128GB (8 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128 GB kit scales multi-threaded workloads across eight 16 GB modules
- DDR5 4800 speed feeds data to SuperMicro 211SE and 31AS platforms
- ECC registered design corrects single-bit errors for mission-critical uptime
- CL40 latency at 1.1 V balances throughput with power efficiency
- 288-pin 1Rx8 layout drops into X31SEED-SF slots without extra configuration
SuperMicro DDR5 4800 ECC RDIMM kit
This 128GB kit contains eight 16GB registered DDR5 modules rated at 4800 MT/s with CL40 latency and 1.10V operation. It is built for SuperMicro IoT SuperServer SYS-211SE and X31SEED-SF platforms that require ECC RDIMM memory.
Thermals and power profile
Each module runs at the standard DDR5 voltage of 1.10V without a heat spreader, relying on server chassis airflow for cooling. Registered buffering and ECC add minimal overhead while maintaining signal integrity under sustained loads.
What the kit changes
The eight-module population fills all channels on compatible SuperMicro boards, enabling maximum registered ECC capacity for virtualization and database workloads. Builders needing non-ECC UDIMMs or higher frequencies cannot use this kit.
商品特色
- 128 GB kit scales multi-threaded workloads across eight 16 GB modules
- DDR5 4800 speed feeds data to SuperMicro 211SE and 31AS platforms
- ECC registered design corrects single-bit errors for mission-critical uptime
- CL40 latency at 1.1 V balances throughput with power efficiency
- 288-pin 1Rx8 layout drops into X31SEED-SF slots without extra configuration
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K8 |
| Capacity | 128GB (8 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (8X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
商品問答
How do I install the 8x16GB DDR5 RDIMMs in my SuperMicro SYS-211SE server, and which step is most often missed?
Power down, open the chassis, align each 288-pin module with the slot key and press firmly until both latches click; the step most often missed is seating all eight modules before the first boot so the memory controller trains the full 128GB at DDR5 4800.
What maintenance or replacement will this ECC RDIMM kit need over its service life?
No scheduled maintenance is required; if a module fails the ECC logic will flag correctable errors, and the faulty 16GB stick can be replaced individually while the remaining seven continue operating at CL40 1.10V.
What limit appears first when the 1Rx8 registered modules run sustained workloads at 4800 MT/s?
The registered buffer and on-die ECC add latency, so the CL40 timing ceiling is reached before thermal throttling on these heat-spreader-less modules.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
