我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 128GB DDR5-5600 ECC RDIMM 4x32GB CL46 Supermicro H14SHM memory upgrade

SKU CH-TXGJ-GPPF5

A 128 GB DDR5 kit of four 32 GB registered ECC RDIMMs running at 5600 MHz CL46 1.1 V for Supermicro H14SHM servers

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 128 GB kit fills four slots with matched 32 GB modules
  • DDR5-5600 speed runs at the board's rated PC5-44800 frequency
  • Registered ECC architecture corrects single-bit errors for enterprise stability
  • CL46 latency at 1.10 V matches the controller's exact timing spec
  • 288-pin RDIMM form factor fits Supermicro H14SHM without adapters

128 GB DDR5-5600 ECC RDIMM kit for Supermicro H14SHM

This 128 GB kit contains four 32 GB DDR5-5600 registered ECC modules built to the exact rank, voltage and timing the H14SHM memory controller expects. It is intended for administrators who need to maximise the board's supported capacity with hardware that will be recognised at full speed without manual tuning.

Upgrade from partial or slower DDR5 populations

Replacing a partially filled bank or lower-speed DDR5 modules with this fully populated 4 x 32 GB kit lets the server run every slot at the rated 5600 MT/s data rate. The jump is worth it when your workloads demand the full 128 GB capacity and the registered architecture's signal integrity for continuous operation.

Verify DIMM population rules

The H14SHM has specific population requirements that dictate which slots must be filled first and whether mixed-rank configurations are allowed. Consult the motherboard manual for the approved installation sequence and maximum supported capacity per channel to avoid a configuration that will not POST.

商品特色

  • 128 GB kit fills four slots with matched 32 GB modules
  • DDR5-5600 speed runs at the board's rated PC5-44800 frequency
  • Registered ECC architecture corrects single-bit errors for enterprise stability
  • CL46 latency at 1.10 V matches the controller's exact timing spec
  • 288-pin RDIMM form factor fits Supermicro H14SHM without adapters

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Does the 288-pin DDR5 RDIMM form factor match the Supermicro H14SHM memory slots?

Yes, the kit uses 288-pin DDR5 Registered DIMMs, which is the exact form factor the H14SHM motherboard requires.

What population order should I follow when installing the four 32GB modules on the H14SHM?

Consult the Supermicro H14SHM manual for the approved DIMM population sequence; the board's memory controller expects a specific slot order for full 128GB recognition.

Will the registered ECC design reduce long-term error-related downtime on this server?

The registered architecture offloads the memory controller and on-die ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots during production workloads.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。