我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR4 RDIMM sticks without heat spreaders, 288-pin, 16 GB kit

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2933 ECC RDIMM CL21 1.2V 288-Pin memory upgrade for ASRock Rack ROMED8-2T

SKU CH-WC69-MNR3H

16 GB registered ECC DDR4 kit at 2933 MHz, CL21, 1.2 V, validated for ASRock Rack ROMED8-2T EPYC motherboards

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 16GB 2X8GB

  • ECC protection prevents data errors in critical workloads
  • Registered design improves signal integrity for stable server operation
  • 2933 MHz DDR4 speed matches ASRock Rack ROMED8-2T specifications
  • Dual-rank 1Rx8 configuration optimises memory controller efficiency
  • Low 1.20 V voltage reduces power draw and heat

NEMIX RAM 16GB DDR4 2933 ECC RDIMM Kit

This 16GB kit contains two 8GB DDR4 2933 ECC registered DIMMs built for the ASRock Rack ROMED8-2T motherboard. The modules run at PC4-23400 speed with CL21 latency and 1.20V voltage. They use a 1Rx8 organisation and major-brand chips from Samsung, Micron or Hynix.

Suits EPYC servers needing registered ECC.

Registered ECC RDIMMs are required by the target server board, so this kit fits EPYC-based systems that demand error correction and registered signalling. Builders using consumer boards that accept only unbuffered non-ECC memory should choose a different module type.

Registered ECC RDIMM is the deciding specification

The motherboard requires DDR4 registered ECC DIMMs, and this kit matches that exact requirement with 288-pin RDIMM form factor, ECC functionality and registered buffering. Selecting unbuffered or non-ECC memory would prevent the system from operating correctly.

商品特色

  • ECC protection prevents data errors in critical workloads
  • Registered design improves signal integrity for stable server operation
  • 2933 MHz DDR4 speed matches ASRock Rack ROMED8-2T specifications
  • Dual-rank 1Rx8 configuration optimises memory controller efficiency
  • Low 1.20 V voltage reduces power draw and heat

商品規格

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 2933MHZ ECC RDIMM Registered Server Memory
Part NumberMR23400-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Does the ASRock Rack ROMED8-2T need any specific BIOS setting to recognise these 288-pin ECC RDIMMs?

The motherboard should detect the 1.20 V DDR4 2933 modules automatically; consult the board manual for any recommended memory-configuration options.

Can I keep my existing DDR4 RDIMMs installed while adding this 2 x 8 GB kit?

Mixing ranks or speeds may force all channels to the lowest common timing; for best stability populate identical 1Rx8 modules in matched slots.

How do I confirm the kit is running at CL21 2933 MHz after installation?

Check the BIOS memory information screen or use a tool such as dmidecode to verify speed shows 2933 MT/s and CAS latency 21.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。