BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
NEMIX RAM
Dual-channel 16 GB DDR5 kit at 4800 MHz CL40, 1.1 V, validated for Alienware Aurora R15
This 16GB kit contains two 8GB DDR5 UDIMMs validated for the Dell Alienware Aurora R15 desktop. Each module runs at 4800 MT/s with a CL40 latency and 1.10V operating voltage. The 288-pin unbuffered non-ECC design matches the motherboard's memory slots directly. Builders upgrading this specific platform can install the pair without configuration changes.
Every stick uses Samsung, Micron or Hynix components screened under load before shipment. The 1Rx8 organisation and PC5-38400 rating reflect the exact timing table the Aurora R15 firmware expects. No heat spreaders are fitted, so the modules sit flush in tight chassis layouts. The kit ships as a matched pair to ensure dual-channel operation from the first boot.
The bare circuit board keeps the profile low enough for crowded DIMM banks or large CPU coolers. Gold-contact 288-pin edges resist oxidation during long service intervals. Dell-qualified firmware on the SPD chip allows the system to train at 4800 MT/s automatically. Buyers needing ECC, registered buffers or speeds beyond 4800 MT/s should select a different part number.
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR5 5600MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT |
The CL40 timing is a fixed specification of these DDR5 modules and does not change with age; no maintenance or replacement of the latency setting is required.
The primary limit under sustained load is the 1.10 V operating voltage and CL40 latency, which define the stable speed ceiling for this 16 GB kit.
Without a heat spreader the bare DDR5 UDIMMs run at the standard 1.1 V, so they generate only modest warmth and zero audible noise in normal use.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?