我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with black memory chips, no heat spreader, gold edge connector, 288 pins

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 ECC RDIMM 1Rx4 CL19 1.2V 288-Pin Synology SA3600 memory upgrade

SKU CH-64B9-1K6TG

16 GB DDR4 2666 ECC RDIMM with CL19 latency and 1.2 V operation, validated for Synology SA3600 systems

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 2666 ECC RDIMM boosts Synology SA3600 capacity
  • Registered 1Rx4 design with CL19 latency ensures data integrity
  • 2 V low-voltage operation reduces server power draw
  • Major OEM Samsung, Micron or Hynix chips deliver enterprise reliability
  • 288-pin DDR4 form factor installs directly into SA3600 slots

Synology SA3600 ECC RDIMM Upgrade

This 16 GB DDR4 2666 module is built specifically for the Synology SA3600 NAS. It uses ECC registered RDIMM technology to protect data integrity in always-on storage workloads. The single 1Rx4 rank runs at 1.2 V with a CL19 latency profile.

Verify Slot Count and Population Rules

Before ordering, confirm how many memory slots your SA3600 chassis provides and whether the existing configuration requires matched pairs or specific slot ordering. The system accepts 288-pin DDR4 RDIMMs only, so UDIMM or SO-DIMM modules will not fit. Check the current firmware version as well, because some revisions enforce strict vendor whitelists.

Sustained Load Stability With ECC Correction

Under continuous operation the registered buffer reduces electrical load on the memory controller, keeping signal quality consistent during long backup or replication jobs. ECC circuitry corrects single-bit errors on the fly, preventing silent data corruption that can accumulate over days of heavy throughput. The 1.2 V operating point helps maintain thermal headroom inside the compact NAS enclosure.

商品特色

  • 16 GB DDR4 2666 ECC RDIMM boosts Synology SA3600 capacity
  • Registered 1Rx4 design with CL19 latency ensures data integrity
  • 2 V low-voltage operation reduces server power draw
  • Major OEM Samsung, Micron or Hynix chips deliver enterprise reliability
  • 288-pin DDR4 form factor installs directly into SA3600 slots

商品規格

BrandNEMIX RAM
SeriesSynology Compatible Series NAS Memory
ModelSynology DDR4 2666MHZ ECC RDIMM Registered Server Memory
Part NumberMR21300-614K1
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSynology
CAS LatencyCL19
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2666MHZ PC4-21300 1Rx4 1.2V CL19 288-PIN ECC RDIMM Registered Server Memory

商品問答

Does the package include anything besides the single 16 GB DDR4 2666 ECC RDIMM module?

The package contains only one 16 GB DDR4 2666 ECC RDIMM module; no heat spreader, cables or additional components are included.

Should I choose the 1Rx4 CL19 version or a different rank and latency for my Synology SA3600?

This 1Rx4 CL19 module matches the SA3600 qualified configuration; other rank or latency combinations are not validated for that system.

Will the rated 2666 MT/s speed actually run at 2666 once installed in the SA3600?

The SA3600 memory controller operates DDR4 at 2666 MT/s, so the module will run at its rated 2666 speed without down-clocking.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。