我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 ECC RDIMM 2Rx8 CL22 Hynix HMA82GR7CJR8N-XN memory upgrade

SKU CH-8NZ8-1G3ZA

16 GB DDR4 3200 ECC registered DIMM, CL22, 1.2 V, 288-pin server memory module

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB capacity expands server memory headroom
  • ECC registered design protects data integrity in critical workloads
  • DDR4 3200 speed matches platform specifications for reliable throughput
  • CL22 latency at 1.2 V balances responsiveness with power efficiency
  • 2Rx8 288-pin RDIMM form factor fits compatible Hynix server boards

Server Memory Upgrade

This NEMIX RAM module provides 16GB of DDR4 3200 registered ECC memory for compatible Hynix server and workstation platforms. The single 288-pin RDIMM operates at 1.20V with CL22 latency and uses a 2Rx8 organisation built from major OEM chips. It is designed for system-specific memory slots that require registered, error-correcting modules.

Registered ECC Requirement

The deciding specification is the registered ECC RDIMM form factor with 2Rx8 rank configuration. Only motherboards and systems that explicitly support DDR4 registered ECC memory can use this module; unbuffered or non-ECC slots will not accept it. Verify your platform documentation for registered DIMM compatibility before purchase.

IT Professionals and Compatible Systems

This module suits administrators upgrading Hynix-branded servers, workstations or NAS devices that call for PC4-25600 registered ECC memory. It is not for desktop builders using consumer motherboards that require unbuffered non-ECC DIMMs, nor for laptops or small-form-factor systems that use SODIMM modules. Buyers needing different capacities, speeds or unbuffered memory should look at other parts.

商品特色

  • 16 GB capacity expands server memory headroom
  • ECC registered design protects data integrity in critical workloads
  • DDR4 3200 speed matches platform specifications for reliable throughput
  • CL22 latency at 1.2 V balances responsiveness with power efficiency
  • 2Rx8 288-pin RDIMM form factor fits compatible Hynix server boards

商品規格

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHynix
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

商品問答

Will the 3200 MT/s rating run at that speed once installed in my server?

The module is rated for DDR4 3200 (PC4-25600). Actual operating speed depends on the server's memory controller and the number of DIMMs populated per channel; the system will negotiate the highest common speed at boot.

What does the registered ECC design mean for my platform?

This is a 288-pin DDR4 RDIMM with on-board register and ECC. It requires a motherboard that supports registered ECC memory; consumer desktop boards will not accept it.

Does the 288-pin RDIMM fit a standard server DIMM slot?

Yes. The stick uses the standard 288-pin DDR4 RDIMM form factor and 1.20 V operation, so it installs in any server or workstation slot wired for DDR4 registered memory.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。