BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00277984BTC
現貨
NEMIX RAM
NEMIX RAM 16GB DDR5 4800 CL40 1.1V 288-Pin UDIMM SuperMicro memory upgrade
16 GB DDR5 module running at 4800 MT/s with CL40 timing for Supermicro workstations
- Capacity16GB
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 16GB DDR5 module expands SuperMicro workstation memory capacity
- 4800 MT/s DDR5 speed delivers high data throughput for demanding workloads
- CL40 CAS latency provides responsive memory access timing
- 1V operating voltage reduces power consumption during operation
- 288-pin UDIMM form factor fits compatible SuperMicro DDR5 motherboard slots
SuperMicro DDR5 4800 UDIMM
This NEMIX RAM module provides 16 GB of DDR5 memory rated at 4800 MT/s with a CL40 latency and 1.10 V operating voltage. It is built as a 288-pin unbuffered non-ECC UDIMM using major OEM DRAM chips and carries the part number MD38400-618K1 for SuperMicro compatibility. The single-rank 1Rx8 design fits standard DDR5 desktop and workstation slots.
Suits SuperMicro workstations needing a single 16
Buyers whose systems require registered or ECC memory cannot use this unbuffered non-ECC module. Builders looking for capacities above 16 GB per slot or speeds beyond 4800 MT/s will need different modules. Anyone without a DDR5-compatible SuperMicro platform should verify their motherboard specification before purchasing.
4800 MT/s DDR5 speed rating
The PC5-38400 designation confirms the module runs at 4800 MT/s, which is the key specification that determines whether it matches the memory controller requirements of the target SuperMicro system. If the platform demands a different data rate this stick will not operate at its rated performance.
商品特色
- 16GB DDR5 module expands SuperMicro workstation memory capacity
- 4800 MT/s DDR5 speed delivers high data throughput for demanding workloads
- CL40 CAS latency provides responsive memory access timing
- 1V operating voltage reduces power consumption during operation
- 288-pin UDIMM form factor fits compatible SuperMicro DDR5 motherboard slots
商品規格
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-618K1 |
| Capacity | 16GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM |
商品問答
Does my motherboard need a 288-pin DDR5 slot for this UDIMM?
Yes, this module uses the 288-pin DDR5 UDIMM form factor and requires a matching slot on a compatible Supermicro system.
Can I add this 1Rx8 module alongside existing 1Rx8 DDR5 sticks?
Yes, adding this 1Rx8 module next to other 1Rx8 DDR5 modules is supported on compatible Supermicro platforms that accept mixed ranks.
How do I confirm the memory runs at 4800 MT/s with CL40 after install?
Check the BIOS or an OS tool such as CPU-Z; it should report 4800 MT/s and CL40 timings at 1.10 V.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
